|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
2 IH 433 payscrapers (ps433-2 moves)
I do not quite remember all of the beginning so I'll give some pics w/a narrative . I decided to try to build (what I have seen thus far) what has not been done . so far it is a great success
the scaling of pics and design and pattern making , starts with a parts book and some general knowledge of compacity range as it's difficult to acquire data for these old machines . all motor scrapers have a basic shape and size according to bowl compacity . So I figured out the comparable machine in another bran such as a cat 637 to get the general dimensions . basically using the tire size to finesse the design the patterns the 5th wheel the cut plates waiting to be welded the next few pics are of the assembly . now scrapers are heavy so are these by design the round at the goose neck is a 12000# front axle king pin the bowl assembly the goose neck 5th wheel and goose neck some cab and sheet metal grill drive train HPI savage diffs anhime automation gear motors tried as a single speed great for loading but slow as **** for travel so playing with traxxas e-maxx 2 speed manual trans running out off room to be continued |
#2
|
||||
|
||||
I will be back to work on this 1 which I labeled ps433-2 soon . My 2nd trans showed up today . now to free up the lathe to make a few couplings .
as I said before I will have my vids up as soon as I get you-tube figured out . I got the watching fixed by getting a computer with a bigger processor thats it for now thanks for looking IHSteve |
#3
|
||||
|
||||
looking good steve, cant wait for more!!
__________________
"My son will have a chocolate milk" -J.P. Next East Coast Minitruckers Meet: Arioch |
#4
|
||||
|
||||
Glad to see you found another trans.
__________________
AKA "00" Biddle RIP FreddyGearDrive 2-12-59/12-19-11 |
#5
|
||||
|
||||
Thats sweet...alll hand made..You the man Steve!!
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. One Bus Stop Short Of The Short Bus... |
#6
|
|||
|
|||
Your looking good Steve. Ed
|
#7
|
||||
|
||||
Glad to hear about the new tranny Steve, look forward to an update.
__________________
Joe |
#8
|
|||
|
|||
Re: 2 IH 433 payscrapers (ps433-2 moves)
Steve it seems to be really coming around. Ed
|
#9
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
thanks Ed . I'm actually working on it I haven't felt well yesterday now it carried into today so it's not lack of sleep . Its the way my body is with this weather . I'm figuring my gear train so I do not have to re do
here's the first vid of it loading I wiil try to get the next 1 on y-tube for those who can't see p-b IHB
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#10
|
|||
|
|||
Re: 2 IH 433 payscrapers (ps433-2 moves)
Steve.. Nice going..
I could bring the D8 by to use as a push cat to save all that bending over..LOL I always wondered how well a scraper would work for us..Lots of possibilities What does the scraper weigh..?? |
#11
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
in excess of 40# , the weight is the key
IHB
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#12
|
|||
|
|||
Re: 2 IH 433 payscrapers (ps433-2 moves)
ihbuilder-looking good!! what tires are you using and what size are they?
|
#13
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
thanks Dan , yea she's getting heavy and not done yet still got to make the ejector and may fill the tires w/bb's + elec. and hydros . thats the purpose for the 5900i + rogers so I don't have to carry it
thanks Tom , the tires are off the tamiya mammoth . 6" dia. x 2" wide they scaled out rite on IHSteve
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#14
|
|||
|
|||
Re: 2 IH 433 payscrapers (ps433-2 moves)
Hey Steve run up here and move my excavator with your lowboy will you? Ed
|
#15
|
|||
|
|||
Re: 2 IH 433 payscrapers (ps433-2 moves)
Thanks for the info-I gave up on the mining truck I wanted to build because I couldn't find the correct size tires.
|
#16
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
Tom, Why don't you try to cast some tires from silicone? If you could come up with the right size you probably could sell some to others in the same situation. What dimensions are you looking for?
|
#17
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
I grew up with IH construction equipment and really enjoy seeing your scrapers. What truck are you considering?
Ken Sharp |
#18
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
I wish someone on this side of the pond would do this.
|
#19
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
well Matt , it has been on my mind , but with my current makings the demand has exceded the supply
not only that I got to many builds going IHSteve
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#20
|
||||
|
||||
Re: 2 IH 433 payscrapers (ps433-2 moves)
I agree the construction tire issue is not very good here ...Wonder if the rock crawler parts supplier that makes the scale rig tires could be talked into making a few different versions ..Im sure the are a few guys on here the know him personaly .
THe scrapers are looking good steve...looks like you have the drive pretty well figured out with tons of power to load ..Are you planning to add a second gear as well? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|