RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-22-2022, 12:07 AM
pufferfish pufferfish is offline
Newbie
 
Join Date: Dec 2021
Location: Cologne, Germany
Posts: 91
pufferfish is on a distinguished road
Default Building an Excavator from Scratch

Hi,

actually my Mining Dumper is completed for 98 percent and just waiting for spring to get some small details out of my resin printer.

But playing only with a dumper is quickly boring. So I need a suitable loading vehicle. After some research I decide to build a tracked excavator. From scratch of course.

I don't have any experiences with excavators so the complete project will be a great challenge.

First, i would like to say that it will be a fantasy rig, no original, no liebherr, no cat. Just a little big monster with tracks and a bucket on the other end.

My goals are learning much about excavators and get a feeling for this, for me, new genre.


-----------
All starts with the tracks. Researches show me, that real scale tracks are very expensive. Too expensive for a project whose ending is doubtful.

So I've ordered a standard industrial chain with brackets to hold the crawler plates





The form isn't flat like the real chains so i've to use a simple trick to prevent the running wheels from hopping.

I orderded simple small chain wheels and cut the half of the teeth.


So it will be a smooth rolling with the ability to hop over a little stone.

The holders of the tracks and their wheels follows

10 blocks of aluminium


shaped


drilled and provided with bushings and axles


mounted on a stainless sheet.
(The complete holder will get a optical more suitable hull later.)



shortly before christmas i've made a little cardboard model to get a feeling for sizes. the table has 120cm length

__________________
Regards
Ralf

Last edited by pufferfish; 01-23-2022 at 12:16 PM.
Reply With Quote
  #2  
Old 01-22-2022, 03:45 PM
pufferfish pufferfish is offline
Newbie
 
Join Date: Dec 2021
Location: Cologne, Germany
Posts: 91
pufferfish is on a distinguished road
Default Re: Build an Excavator from Scratch

While waiting for material i've made the hydraulic cylinders

the cylinder are made from seamless, high precision stainless tubes



almost ready. just the ports are missing. i don't know the exact positions so far.


in the box laying the crawler plates too.

drive train is ready for testing



first little testrun on the terrace

https://blog.rb-fotos.de/wp-content/...01/testrun.m4v


The connector between undercarriage and body is done.



That is the actual standing of this project.

More to come....

....if anyone is interested
__________________
Regards
Ralf
Reply With Quote
  #3  
Old 01-22-2022, 06:22 PM
Tgrzes Tgrzes is offline
Newbie
 
Join Date: Aug 2020
Posts: 95
Tgrzes is on a distinguished road
Default Re: Build an Excavator from Scratch

I can’t even think as fast as you fabricate/Machine stuff…lol.
Reply With Quote
  #4  
Old 01-22-2022, 07:49 PM
bigpipespete bigpipespete is offline
Wannabe
 
Join Date: Nov 2010
Location: Surrey BC, Canada
Posts: 307
bigpipespete is on a distinguished road
Default Re: Build an Excavator from Scratch

Must be nice to be able to make machines that are yours instead of paying thousands to someone else to make it. I admire you guys.
Reply With Quote
  #5  
Old 01-23-2022, 09:43 AM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 2,040
frizzen is on a distinguished road
Default Re: Build an Excavator from Scratch

Wow, that's looking like its going to be great!
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #6  
Old 01-24-2022, 03:09 PM
pufferfish pufferfish is offline
Newbie
 
Join Date: Dec 2021
Location: Cologne, Germany
Posts: 91
pufferfish is on a distinguished road
Default Re: Build an Excavator from Scratch

Last post with pre-fabricated things.


i first attempt for crawler-plates. they need some improvements



the large bolt for the rotary union



fits perfect


but with a bit weight n the upper base plate, the bolt tilted





so i've made today a counterpart to avoid this.


















Thats it. From now on my posts in this thread coming not so fast anymore
__________________
Regards
Ralf
Reply With Quote
  #7  
Old 01-26-2022, 12:15 PM
pufferfish pufferfish is offline
Newbie
 
Join Date: Dec 2021
Location: Cologne, Germany
Posts: 91
pufferfish is on a distinguished road
Default Re: Build an Excavator from Scratch

Finetuning of the crawler plates. 1,5mm between work and crash




70 times


no more collisions



last pic: first attempt of the teeth.
Not scale, i know. But they will make grip, I hope
__________________
Regards
Ralf
Reply With Quote
  #8  
Old 01-27-2022, 02:14 PM
pufferfish pufferfish is offline
Newbie
 
Join Date: Dec 2021
Location: Cologne, Germany
Posts: 91
pufferfish is on a distinguished road
Default Re: Build an Excavator from Scratch

Today, in an attack of work mania, I've made 140 threads and mounted the crawler plates for th first track.



Now I'm waiting for the next attack for the second track
__________________
Regards
Ralf
Reply With Quote
  #9  
Old 01-28-2022, 02:14 PM
pufferfish pufferfish is offline
Newbie
 
Join Date: Dec 2021
Location: Cologne, Germany
Posts: 91
pufferfish is on a distinguished road
Default Re: Build an Excavator from Scratch

The undercarriage gets his stabilizations.
Looks a bit rough, but later invisible.


Stable enough, I think
(The carriage isn't so small, my feet have size 16 1/2)


After this succesful test, the hull work started


__________________
Regards
Ralf
Reply With Quote
  #10  
Old 01-28-2022, 08:44 PM
bigpipespete bigpipespete is offline
Wannabe
 
Join Date: Nov 2010
Location: Surrey BC, Canada
Posts: 307
bigpipespete is on a distinguished road
Default Re: Build an Excavator from Scratch

Its looking really good so far.
Reply With Quote
  #11  
Old 01-29-2022, 02:18 PM
pufferfish pufferfish is offline
Newbie
 
Join Date: Dec 2021
Location: Cologne, Germany
Posts: 91
pufferfish is on a distinguished road
Default Re: Build an Excavator from Scratch

Thank you.

For better planning the positions and pipe layout upwards, I need all components for a manual tetris.

electronics, pump, valves etc. are already on board. just the oil tank is missing.

500ml volume is needed.

Welding is expensive in labor. So i've calculate the seams length of a quader and a cylinder. The cylinder wins with 30cm lead.

And here is the building of the oil-tank



raised thickness to hold the threads for the nipples


the ring welded on one sheet and cutting the excesses




testing with water and fixing some micro holes


ready for tetris
__________________
Regards
Ralf
Reply With Quote
  #12  
Old 01-30-2022, 01:02 PM
pufferfish pufferfish is offline
Newbie
 
Join Date: Dec 2021
Location: Cologne, Germany
Posts: 91
pufferfish is on a distinguished road
Default Re: Build an Excavator from Scratch

Hi,
positioning was easy. I wish, I have so much space in every model



the sandwich construction of the baseplate prevents a simple fasteting from below.

Thereby i've made a socket.


ready


valves and tank are mounted too
__________________
Regards
Ralf
Reply With Quote
  #13  
Old 01-30-2022, 08:40 PM
bigpipespete bigpipespete is offline
Wannabe
 
Join Date: Nov 2010
Location: Surrey BC, Canada
Posts: 307
bigpipespete is on a distinguished road
Default Re: Build an Excavator from Scratch

Very nice , sorry if i missed it but what is the scale of this excavator ?
Reply With Quote
  #14  
Old 01-30-2022, 10:41 PM
pufferfish pufferfish is offline
Newbie
 
Join Date: Dec 2021
Location: Cologne, Germany
Posts: 91
pufferfish is on a distinguished road
Default Re: Build an Excavator from Scratch

Quote:
Originally Posted by bigpipespete View Post
Very nice , sorry if i missed it but what is the scale of this excavator ?
sorry, it's 1/10.

because i've no idea from excavators so far, i've roughly copied the sizes from the liebherr r966
__________________
Regards
Ralf
Reply With Quote
  #15  
Old 02-05-2022, 09:39 AM
pufferfish pufferfish is offline
Newbie
 
Join Date: Dec 2021
Location: Cologne, Germany
Posts: 91
pufferfish is on a distinguished road
Default Re: Build an Excavator from Scratch

This will be my last post here. too much work for just a few clicks and almost no replys.

Enjoy your hobbies.


Bye
__________________
Regards
Ralf
Reply With Quote
  #16  
Old 02-05-2022, 03:48 PM
Soul2012 Soul2012 is offline
Newbie
 
Join Date: Nov 2018
Location: Lebanon, PA South Central PA
Posts: 3
Soul2012 is on a distinguished road
Default Re: Build an Excavator from Scratch

I am really sorry to hear this.
It would figure I get in here a day to late.
I am really enjoying following this build even if it was all here in 1 day.
I can only hope we can get you to change your mind about this because I feel I am learning a lot just by following along.
I hope to see this completed and in action one day.

Best of luck to you,

Brian M.
Reply With Quote
  #17  
Old 02-05-2022, 07:09 PM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 2,040
frizzen is on a distinguished road
Default Re: Build an Excavator from Scratch

I'm sorry you feel that way, and that feeling is a large part of why so many forums and message boards become ghost towns.

Your solutions and build techniques are really impressive. I've been watching in awe without having much that would add to the conversation since i don't know much about the machining syde of things. I didn't want to clutter up your builds with too much of the same sounding praise and admiration
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #18  
Old 02-05-2022, 08:53 PM
Tgrzes Tgrzes is offline
Newbie
 
Join Date: Aug 2020
Posts: 95
Tgrzes is on a distinguished road
Default Re: Build an Excavator from Scratch

Same here. I enjoy looking at all the builds and have learned a lot so far, but I often find it hard to comment if I don’t fully understand all the trucking/construction terminology and can’t contribute solutions. Would love to see the end result of this build.
Reply With Quote
  #19  
Old 02-06-2022, 12:35 AM
Jared Jared is offline
Green Horn
 
Join Date: Dec 2010
Location: Southwest Washington
Posts: 173
Jared is on a distinguished road
Default Re: Build an Excavator from Scratch

I hope you'll change your mind! I've enjoyed watching the progress and your methods which are different from most on here.
Reply With Quote
  #20  
Old 02-06-2022, 09:40 PM
bigpipespete bigpipespete is offline
Wannabe
 
Join Date: Nov 2010
Location: Surrey BC, Canada
Posts: 307
bigpipespete is on a distinguished road
Default Re: Build an Excavator from Scratch

Thats a shame and i hope also you will change your mind and continue to post progress.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:21 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.