|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
VolVo EC300
it was year 2014 project for a nice friend. after done working on my PC200, meet a new friend, a very nice guy. he wanted an excavator but not the PC200 but for Volvo EC300 instead. he like the Volvo design very much. he keep asking me to design and fabricated it for him. but at that time i having another project for a 5 axle low bed. i ask him to wait till i m done with the low bed or pre-design the excavator on a sketch so that would ease some of my work when i m start off.
half a year pass by, i thought he would had gave up his EC300. but nope, he been keep waiting for my unoccupied time slot. here some of his work prepared for me. [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] Last edited by der82c; 04-21-2015 at 01:02 PM. |
#2
|
|||
|
|||
VolVo EC300
|
#3
|
|||
|
|||
VolVo EC300
|
#4
|
|||
|
|||
VolVo EC300
|
#5
|
|||
|
|||
VolVo EC300
from the production
[IMG][/IMG] [IMG][/IMG] [IMG][/IMG] stainless steel bucket as to prevent rust when the paint peeling off by time. the welding work are not as perfect as i expecting. the junior welder use the wrong size of tungsten lead for fine welding. was hoping it turn out fine after powder coat [IMG][/IMG] Last edited by der82c; 04-22-2015 at 01:36 AM. |
#6
|
|||
|
|||
Re: VolVo EC300
after powder coating,
well,the bucket turn out quit "ok" for me. [IMG][/IMG] [IMG][/IMG] initial assembly of the body parts without hydraulic and electronic system. no quit have it alive and sense of its spirit of a volvo yet as the exterior still smooth plain. its just a moderate built, this model is not much compare to other great builders around. it least serve the objective [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] |
#7
|
||||
|
||||
Re: VolVo EC300
Great project!
Looks like the hydraulic system is correctly matched to the model size for fluent movement, do you know the manufacture and/or any specs of pump, valves & cylinder size?
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#8
|
||||
|
||||
Re: VolVo EC300
Great project!
Looks like the hydraulic system is correctly matched to the model size for fluent movement, do you know the manufacture and/or any specs of pump, valves & cylinder size?
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#9
|
|||
|
|||
Re: VolVo EC300
Quote:
if not mistaken, it was not local made nor from western side. i think its from china |
#10
|
|||
|
|||
Re: VolVo EC300
|
#11
|
|||
|
|||
Re: VolVo EC300
|
#12
|
|||
|
|||
Re: VolVo EC300
since the excavator is running without problem,
i had gone back to my other 2 project, the trailer dumper and finger crane. hopefully able to post some pic soon. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|