|
#1
|
|||
|
|||
I got a new idea....
My next project should have been a Torro M16 halftrack, but due to an ugly big car bill it unfortunately has to wait a bit....
But then got another idea instead.... Had this wild led which takes a 9v battery directly and since I was in Normandy I've been a bit crazy about the big anti-aircraft searchlight so why not play around with that idea. This model I'm thinking of. After a trip to various boxes and around the boys' room, I had a few things to go on with. Here is what I achieved today... Now it needs some paint and the electrics installed, so time will tell if it can look roughly right. It won't be 100%, I know. |
#2
|
||||
|
||||
Re: I got a new idea....
That's a really bright idea!
Do you have metal Coffee Cans available to try looking at for the light housing?
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time... |
#3
|
|||
|
|||
Re: I got a new idea....
No, unfortunately not, I plan to try this one in plastic, but I don't know if it can withstand the heat
|
#4
|
|||
|
|||
Re: I got a new idea....
Metal coffee cans might be hard to come by, what about any large metal vegetable can...
Really bright idea.... I see what you did there...LOL |
#5
|
|||
|
|||
Re: I got a new idea....
Wish I had caught it myself first😂👍
|
#6
|
|||
|
|||
Re: I got a new idea....
Awesome! Something new and different, I love it. That LED chip will generate some heat but if you mount it on a larger aluminum heat sink it might be ok in the plastic container. Put some short standoffs between the container and the heat sink so air can circulate around it.
|
#7
|
|||
|
|||
Re: I got a new idea....
The back of the joint is no problem, it hardly gets hot. If plastic can't hold, I go in search of a metal can.
Lower parts will also be slightly different as it does not get the wheel completely free in corners, but will sit inside underneath. |
#8
|
||||
|
||||
Re: I got a new idea....
Sorry, it was a pretty bad joke...
I'm glad it should be a cool enough led to work in that setup. I'm thinking this would look killer next to something like a M45 Quad-mount 50cal
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time... |
#9
|
|||
|
|||
Re: I got a new idea....
Quote:
This one will be my next vehicle |
#10
|
|||
|
|||
Re: I got a new idea....
I thought it was very funny, just my kind of humor!
|
#11
|
|||
|
|||
Re: I got a new idea....
You going to have the LED so that it shines back into the reflector like on the original? Or just mount the LED on the back surface of the light so it shines out?
|
#12
|
|||
|
|||
Re: I got a new idea....
It will be the easy solution so that it just shines out without reflection.
|
#13
|
|||
|
|||
Re: I got a new idea....
|
#14
|
|||
|
|||
Re: I got a new idea....
Wow.. it looks great....it will go well with the rest of your WW2 stuff....
|
#15
|
|||
|
|||
Re: I got a new idea....
Thank you, and yes, I hope it will fit in
|
#16
|
|||
|
|||
Re: I got a new idea....
Then it was finished
A Sherman just came by Pictures of on and off And then just a link to a small video on YT https://youtu.be/KHpkwXwdwU0?si=xOSo-fu5cKWrXxJJ https://youtube.com/shorts/5t6GsbOrr...mwfLDJkCAN7tMU |
#17
|
|||
|
|||
Re: I got a new idea....
Not bad for something made from stuff laying around. Now all you need is a scale HE111 pinned in the searchlight beam. (Or maybe make your own Bat signal?)
Last edited by ddmckee54; 08-25-2023 at 02:07 PM. |
#18
|
|||
|
|||
Re: I got a new idea....
Thanks
|
#19
|
|||
|
|||
Re: I got a new idea....
looks very good. Now you need a trailer mounted generator to go with it.
|
#20
|
|||
|
|||
Re: I got a new idea....
Yes, I have thought about that... Could well become a project later.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|