![]() |
|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
![]() |
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
![]()
Well here is an up date. Got no parts yet but I ordered another complete track for one side and have decided that when I get all the parts for both models I am going to make a high track out of the dozer. Getting rid of the aluminum sides and going with steel sides. This will hold the motors and sprocket more stable. Ed
|
#22
|
||||
|
||||
![]()
Bring your "work in progress" next month too. I want to see one of these up close.
|
#23
|
|||
|
|||
![]()
OK Steve I will bring the blade and some parts for the dozer. Ed
|
#24
|
|||
|
|||
![]()
Well men take it from me if you buy anything from Stahl have it built. I got a package finally from TTM Function and still have missing parts. Now to add insult to injury I ordered two cylinders to tip the blade forward and back and said I wanted them 7 mm by 100 mm long all the way out. In the package were there were two cylinders but they were 7 mm by 100 mm but 233 mm long stretched all the way out. Isn't that just wonderful. I told them in a email that they were for tilting the blade. Ed
|
#25
|
|||
|
|||
![]()
hey i might be interested in those pm me please
__________________
I built this thing and have it working now what do I do with it? |
#26
|
||||
|
||||
![]()
"all the way out"?
![]() When buying hydraulics, what Stahl or TTM or Wedico sells is made by Leimbach and this is their www addy http://www.leimbach-modellbau.de/start.html Scroll down left header to Hydraulik, fourth down Zylinder (K) is bore (B) outside cyl dia (L2) length of retracted cyl (HUB) stroke, add that to L2 for total length extended Technische Daten: (K) (B) (L2) (HUB) H0725 7 mm 11 mm 58 mm 25 mm 34,6 N 28,3 N M3 H0750 7 mm 11 mm 83 mm 50 mm 34,6 N 28,3 N M3 H0775 7 mm 11 mm 108 mm 75 mm 34,6 N 28,3 N M3 H07100 7 mm 11 mm 133 mm 100 mm 34,6 N 28,3 N M3 ![]() As you can see, they don't stock that specific length extended stroke. But if that's exactly what you want, they will custom make it for you at extra cost. My Cat colored dozer uses 7x50 and the JD dozer has 7x25 for tilts. Last edited by Lil Giants; 12-31-2010 at 12:08 AM. |
#27
|
|||
|
|||
![]()
Joie thank you very much for that information but I told Herr Thiel who speaks english that they were for the blade on the dozer to tip the blade forward and back on it to replace the two dummy ones. The ones they sent were 233 mm stretched that's as long as the dozer with out the blade, Hello.
|
#28
|
|||
|
|||
![]()
I put these in the wrong place before
![]() ![]() ![]() I just stuck it together with acouple of screws to see if all the parts are there. Now I can get an Idea what it is going to take to make it a high track.Ed Last edited by fhhhstix; 01-23-2011 at 08:06 PM. |
#29
|
|||
|
|||
![]()
looking good ed.almost ready for dirt...
__________________
LARRY,the doggy dish dealer |
#30
|
||||
|
||||
![]()
Lookin good Ed, you'll be pushing dirt soon.
__________________
Scott "No load is too Small" |
#31
|
|||
|
|||
![]()
Larry and Scott thanks a lot I appreciate it. Ed
|
#32
|
|||
|
|||
![]()
hows your dozer and excavato comming Ed? haven't seen any update pics lately
__________________
I built this thing and have it working now what do I do with it? |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|