IH 9670 Trailer Toter "Paint Done"

[ihbuilder]

Originally Posted by tc1cat

I've got more pics if you need them, Steve.

Lynn

got the real 1 in my barn

[Tamiya Cowboy]

Originally Posted by tc1cat

Are you going to add the delrin later? Don't see it in your pics all I see is aluminum???????
By the way, the Toter in my pic is an IH.

Look close it is white..

[Ace Trucker]

hey Paul nice trailer toter

[Tamiya Cowboy]

Ok so last night and today I got the pogo stick finished. I got the winch all set in the truck and I ran the cable threw break line to the back of the truck then up and over to a brass pulley. I ran it on a dead 6 cell pack and it has enuff power to lift the nose off the ground so it works real well I am trying to down load my video off my Black Berry but is not working to well.. I also made a mount for the R2 tranny and mounted it and the steering servo so not some more details and so minor body work and it will be ready for paint I am trying to have it done for the club meet in a few weeks..

Top view of the winch you can see the break line.


Under Side you can see the break line and the brass clamps i made to hold it in place.



The finished Derlin hitch and ball.

[Stylin n profilin]

That is just sweet man...after seeing theses builds....time to go back to the kiddy pool...

[Tamiya Cowboy]

Originally Posted by Stylin n profilin

That is just sweet man...after seeing theses builds....time to go back to the kiddy pool...

LOL Thanks Jon.. Ok got the video working keep in mind I have not charged the battery pack on the winch since St. Louis meet last year..

http://www.youtube.com/watch?v=vAwvEKoYBLg
http://www.youtube.com/watch?v=wJABK8s1bXM

[fhhhstix]

Originally Posted by Stylin n profilin

That is just sweet man...after seeing theses builds....time to go back to the kiddy pool...

John I never left the pool and the water is starting to get cold so I may have to move to the hot tube to watch the builds for a while.


Paul fantastic job keep up the good work.

Travis

[Tamiya Cowboy]

Thanks Much Travis!!

OK I have everything on this truck done all the plastic work is now done all I have left to do is body work and I have to modd another stack but I am waiting on one so hoping to have it done painted next weekend we shall see..

Flipped the ladder around so it did not stick out any further than the out side of the cab and you dont have the big old hunk of chrome mounted to the side of the cab..



All plastic trim done on the back of the bed..


Back wall in and all un needed holes glued shut and ready for body work also filled the blinker mount holes shut and I wil be lowering them to were they belong on a IH 9670..

[MACK Daddy]

Nice Work ! You know me, big fan of the globe


Alfy

[Tamiya Cowboy]

Originally Posted by MACK Daddy

Nice Work ! You know me, big fan of the globe


Alfy

Hey thanks Alfy!! I know you are a cob over kind of guy..

[Diesel Demond]

you know you will get inspected at every scale with that. always the yellow arrow which im to familiar with right now! ***n wisconsin highway patrol has my number

[Tamiya Cowboy]

Originally Posted by tanker yanker

you know you will get inspected at every scale with that. always the yellow arrow which im to familiar with right now! ***n wisconsin highway patrol has my number

LOL Cory try driving threw the scales with your cloths on the might not bother you then..

OK I have been working on the toter I have the frame all painted and all the radio gear is in it I put the cab on it and ran it around this little truck turns on a dime but here is what i have the cab is going out into the shop I have 3 cabs going right now..





I still have to make a new drive shaft but ill get that done tomorrow.

[Izzy]

coming long nicely there Paul .....

[Espeefan]

The hitch turned out great, Paul. The brake line for the winch cable is a good idea. Is that brake line metal, and just painted? It almost looks like plastic, but I've never seen any plastic brake line!

[tc1cat]

Looking good there, Paul. Just wish you were going to make the St. Louis meet so I could see it run around.

[Tamiya Cowboy]

Originally Posted by Izzy

coming long nicely there Paul .....

Thanks much chris. Did you get your mirrors redone on yours

Originally Posted by Espeefan

The hitch turned out great, Paul. The brake line for the winch cable is a good idea. Is that brake line metal, and just painted? It almost looks like plastic, but I've never seen any plastic brake line!

Thanks Nate yeah the break like is metal just painted with semi gloss black

Originally Posted by tc1cat

Looking good there, Paul. Just wish you were going to make the St. Louis meet so I could see it run around.

Thanks Lynn. Yeah I would like to go just lots going on witch is good I was real slow last year at this time.

[Izzy]

Paul - I did ge tthe mirrors re-done - I got the slide out length I wanted - thinking of using a linear servo from Firgeli to actuate them - can't seem to get a standard servo to fit....Thanks for asking .....

[Tamiya Cowboy]

Ok Boys here she is almost done.. All I have left is lights and i am waiting on the light kit with flashers and I have mud flaps and "WIDE LOAD" sings to do and the trailer witch I can wait to build but here are the finished picks..Ill get out side ones tomorrow.

[Espeefan]

Dang Paul, that's your best paint job yet! That is a true International inspired paint scheme through and through. Classic. Exceptional! This truck turned out awesome.

[Roundabout]

Sweet love the paint job!!