|
Electronics tech Anything to do with the electronics in a model. Lights, Radio, ESC, Servo, Basic electrical. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Leds using a old servo board question
Im planing on making my own roof clearance lights and using a old servo board to turn then on / off and my question is -
When wiring up the leds as I plan on having then on there own wired to male plugs and then soldering the female wires into 1 pos and 1 neg lead so each led can be removed seperately, do I still need a resistor for each led as Im keeping the potentiometer attached to the servo board ? The led will be either white or orange but havent decided on the color yet and what is the max number or leds you can run from a servo control board ? Cheers Tracy
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 Love my Kenworths To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|