Brushless motor for 7.2 volts

[GerryK]

The programmer card,Esc & the battery are stand alone the battery powers the card so the Esc can be programmed

Re battery charging. With most chargers you pick battery type ( Lipo) number of cells (2) then the charge current (Lipos are charged at 1C or 1 times the battery capacity in MA for 1 HR ( so a 2000 ma pack is charged at 2000ma(2amps) for 1 Hr. all the chargers shut down the pack when they reach 4.2 volts per cell.

If this is not clear let me know

Gerry