IH 9670 COE

[Tamiya Cowboy]

Thanks much Aaron..

Here is a little update with the smaller cab I have lack of room for a 3 speed so here is what I built.. It is a 3 to 1 reduction with the motor turned around now if my math is right you can go any where from 1:1 to 6:1 just by changing gears. Anyways here are the picks..













Still going to be a little tight but it will work nice.. I did a different version of this tranny a few years ago on my tri axle to get the tranny in the cab due to the cat motor under the hood but this is a new and improved version of that..