1/16 Bucyrus-Monighan Walking Dragline

[9W Monighan]

I can do it quicker manually since there's only two pieces each. First I'd have to locate each one for length possibly rough cut the angle on the bandsaw so I wouldn't have to take several small cuts and do a program for each set. I've done it before on some of the other pieces but it's not worth it for the hundreds of different sized pieces. If I had a tiny chop saw I could cut the angles but I would still have to orient them in the vee fixture properly for notching. I would definitely do the CNC set up if all of them were the same.