|
|
|||||||
| Get it out of your system! HERE! You have a gripe,bone to pick, Tamiya vs Wedico or just have to let it out! THIS IS THE ONLY PLACE TO DO IT! |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
02-22-2014, 10:07 AM
|
||||
|
||||
Spray can Stopped working Half way through.
So I got my King Hauler Thursday and last night I had a chance to start painting the body. I started spraying and the can stopped working after I got the passenger side done. So i mess with the can for a couple minutes and I get it to work again. But then I get to the top anad it stopped working completely. So now I'm left with the question of what to do.. I've never had this happen before. Can I get the same color and finish painting the top hoping the colors match?
Thanks for any input.
__________________
ECMT Members: Join your Group. Go to your username in the top right corner of the page and click on it. When your profile opens go down to group memberships, Click on East Coast Mini Truckers, The social group will open and scroll down And in the middle it you will see "Join Group" Click on it and then confirm that you REALLY wanna join. [SIZE="2"] 
|
|
#2
02-22-2014, 11:19 AM
|
||||
|
||||
|
Re: Spray can Stopped working Half way through.
The color should match providing the can is not very old.
Did you use new can? Is it acrylic,enamel,lacquer? You can soak the sparing tip in lacquer thinner to clear the nozzle,the could be out of gas if its been used before.
|
|
#3
02-22-2014, 07:31 PM
|
||||
|
||||
|
Re: Spray can Stopped working Half way through.
I talked to the Hobby Shop owner and figured out a game plan. Going with a silver coat over whats on it now. Then another light color of blue will be applied. we'll see what happens.
Thank You.
__________________
ECMT Members: Join your Group. Go to your username in the top right corner of the page and click on it. When your profile opens go down to group memberships, Click on East Coast Mini Truckers, The social group will open and scroll down And in the middle it you will see "Join Group" Click on it and then confirm that you REALLY wanna join. [SIZE="2"]
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
