![]() |
|
General Discussion A place to post off topic discussions. |
![]() |
|
Thread Tools | Display Modes |
#21
|
||||
|
||||
![]()
If you guys want to auto action on the outlet door, Robs almost there. All you have to do is cut or file notches at 90 deg to the arm attachment point on the wheel. Install a micro switch with the same 12 volts as the motor runs on using the normally open contacts. Momentarily supply power and the switch closes and will run till it drops into the next slot and shuts off. I hope this make sense as this is how our rail switches work at our live steam track.
Rob |
#22
|
||||
|
||||
![]() |
#23
|
|||
|
|||
![]()
Uh Huh! I was just about to start scouring your posts to find this
![]() Sorry had to cut and run early, had a not so important issue with a phone bill that my wife wanted me to fix up immediately.. and well, gotta keep 'em happy I guess ![]() Good to meet you guys and hopefully I'll have my machine up and running for next meet. |
#24
|
||||
|
||||
![]()
Cool thread! A nice option for loading trucks, if you don't have a loader or excavator. It would just require someone to shovel some dirt by hand, onto the conveyer. Thanks for posting all the information guys. Someday I might have to get one of these.
__________________
Nathan |
#25
|
||||
|
||||
![]() |
#26
|
||||
|
||||
![]() ![]() |
#27
|
||||
|
||||
![]() |
#28
|
||||
|
||||
![]()
I'm don['t know about the Duratoy unit. But I was impressed by the child-powered conveyer:
http://www.youtube.com/watch?v=0PNqW...4&feature=plcp - RCT
__________________
WCMT Director - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. "Keep the Shiny-side Up, the Dirty-side Down & Keep 'er to the Line." |
#29
|
||||
|
||||
![]()
The vibrator was a smart addition. It seems to work well, good job. Maybe its me but I can't see the video posted about the child powered conveyor.
__________________
Brian Finster shavin' and smokin' a cigar?!?! |
#30
|
||||
|
||||
![]()
I'm not sure what happened. The link doesn't seem to be working
![]() Try this: http://www.youtube.com/watch?v=0PNqW...4&feature=plcp - RCT
__________________
WCMT Director - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. "Keep the Shiny-side Up, the Dirty-side Down & Keep 'er to the Line." |
#31
|
||||
|
||||
![]() |
#32
|
||||
|
||||
![]() Quote:
__________________
Nathan |
#33
|
||||
|
||||
![]()
It must be DC-Kids
![]() |
#34
|
||||
|
||||
![]()
Roughly what is the wall angle in the hopper? I am looking at building a hopper for rubber and don't want issues.
Thanks |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|