Electrical Unit Set 56501

[glorydays24]

Originally Posted by Backlash

If you want tail lights, then why not just add a set of 3mm LEDs connected to the headlight circuit??

Just make sure that the 3mm LEDs that you use are not as bright as the 5mm ones you use for the brake lights, or just use a higher value resistor to reduce their brightness..

That is a good idea. But I ran two LED's for tail lights, and when the truck stops I still have brake lights, and one doesn't over power the other. All I need to do now is do the final hook up and it will be done...And I will post pic's.


Thanx buddy, Big John