|
|
|||||||
| Truck Building Tech Covers mechanical and electrical components for truck modeling |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
10-17-2014, 05:21 PM
|
|||
|
|||
Re: Frame catwalk material.
Arrgg...
I found a site that had 9" x 10" (I think) sheets of perforated metal, with round holes, square ones, and even hex patterning... and then I ~stupidly dinna mark the damned thing... All I can remember is I was looking at various RC items - Losi Trail Trekker, the Tamiya semis, trailers, High-Lift's & crawlers, and somehow came across this site and there were the sheets, all in a row. I've tried looking at my IE history, no joy. I did find an eBay seller for auto-grilles, and they are decent if ya want big pieces (6" x36") but I can't seem to find this site again. Just Found It! http://www.TheToyz.com and use the Quick Search box on the right side, plug in " Window or Grille Netting " and you'll get the options. Sadly, I was mistaken on the size... 4" square pieces... but mebbe he'll sell bigger chunks? WhiteWolf Last edited by WhiteWolf McBride; 10-17-2014 at 05:41 PM. 
|
|
#3
10-19-2014, 11:08 PM
|
|||
|
|||
Re: Frame catwalk material.
I also found an eBay dealer...
He sells the pieces for automotive grillework, and I've asked him if he would cut the 6" x 36" pieces into two 6" x 18" sections to save on shipping cost for Canadian shipping, and he said YES! The hex 6x36" sheet is here: http://www.ebay.ca/itm/190630630977 His eBay ID is 'CustomCarGrills': http://stores.ebay.ca/customcargrill...p2047675.l2563 I haven't bought any of his stuff yet, but may get a sheet of the 6x36 sheet to replace the wooden decking on my Carson STN-L3 lowboy trailer. Hope this helps ya out even more... WhiteWolf
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
