Scaleart - assembling an Arocs 8x8 roll on roll off kipper

[Rakthi]

So yesterday I finished of the roof and the rear of the cab







Re-installed the Sound Module with the cables split up and put into shrink tubing as per Christian's suggestion.



Then on the back of the cab



One of the 2mm screw holes not completely drilled through



The parts that need attaching. (the rectangular air vents I glued in with super glue)







This is where it locks onto the chassis.



Next part is the air inlet

Filed the back of the grid a bit down so it fitted a tad better.







Only one self tapping screw and washer used in this