Scaleart - assembling an Arocs 8x8 roll on roll off kipper

[Rakthi]

Finishing of the cabine - Part 1

Started with the seats

Left the passenger seat and right the driver's seat. Neatly packaged and best not opened together and parts mixed as there is a definite left and right seat.



Started with passenger seat





These parts supposed to be glued together with super glue, but after I test fitted them they were solid as can be. So left them as they were. If I ever find the right material I can then make a miniature safety belt like the guys in Germany do.



Screws on to base



Seat cushion next



Bolts on from below with the same self tapping screws (one you do not see because I used one of my black ones.



Passenger seat right side



Left side



Both finished



Next steering wheel and steering column

The covers get glued on with super glue.



Make sure the square nut is well seated. In this picture it is not right. sits too high and then the cover doesn't fit.



Sticker of instruments stuck to the provided piece of plastic



The steering column attached to the driver's side dash with 2 M2x10



Top of the dashboard and passenger's side. The little part is painted in silver by me. Only part I put some paint on. Don't trust myself to paint the little buttons etc.