Metal Excavator - Magom HRC MG1.4

[Digger_Bear]

Also this evening been playing with the settings on the radio.

So now I flick a switch it starts the pump at about 10%. Then

Main boom arm when called for adds 20%
Boom to bucket adds 10%
Bucket adds 10%

So overall the pump is running between 10% throttle at idle to a max 50% throttle with all 3 pistons been used.

It works good but way too fast for me who was running it down at about 20-30% so will make another profile with less power so I can get use to it then switch back to this version when I need the power.