|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
First R/C build: Cat 6015B 1:14 scale
Hello all, ive been contemplating building a 1:14 scale excavator for some time , and its finally happening due to a change in work commitments. Being a fan of the big cats i have chosen a 6015B for my project. This is the new version of the 6015, but is more similar to the old cat 5110B in shape and build.
With no machine to go from ive printed the pictures from the Cat specalog in the correct scale and started drawing up models to suit. Its going to be BIG! 4.5 inch flap wheel to give you an idea on size The bucket side was a quick drawing and 3d printed to compare to the specalog to confirm the modelling was at the correct scale, all found to be ok so on with the tracks. The 6015B uses the same pitch chains as a D11, so a few measurements and a pad and link assembly was drawn up and printed and assembled for fit. This was then followed by a double grouser pad which is correct for this style of excavator Last edited by Jon Auty; 12-22-2017 at 04:20 AM. |
#2
|
||||
|
||||
Re: First R/C build: Cat 6015B 1:14 scale
This is a heck of a first post Jon, and welcome too!
Sounds like a huge project to look forward to. |
#3
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
Looking forward! That's a big CAT. Welcome to the forum.
|
#4
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
Welcome, that's a heck of a project to tackle on a first go but looks like your off to a great start.
|
#5
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
Very nice.. should have plenty of room for a huge battery under that hood.
|
#6
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
Thanks for the comments, im a mechanical engineer by trade and ex Cat service engineer so have alot of knowledge of the caterpillar products. Thats what i was thinking, big model, plenty of space for all the hydraulics and batteries! Its going to be steel and brass in construction so will be quite a heavy lump!
|
#7
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
This looks like an AWESOME build!
|
#8
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
This will be one to follow!
|
#9
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
Its funny that most of us are probably middle age with bad knees or backs yet we keep buying or building bigger and heavier machines. We will have to hire young kids to haul our machines around for us.
|
#10
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
LOL! Very true
|
#11
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
My nephews are ONLY 2 years old, & they're already hooked on RC stuff. A few more years, & I'l have my helpers to carry my stuff around. LOL!
|
#12
|
||||
|
||||
Re: First R/C build: Cat 6015B 1:14 scale
This is a telling pic... your feet bout 2 foot apart? Will the GLR be about 6feet (2m)?
That will be a BEAST!!!
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#13
|
||||
|
||||
Re: First R/C build: Cat 6015B 1:14 scale
Have you seen this guy's build? The size would be comparable.
http://www.rctruckandconstruction.co...ad.php?t=10913
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#14
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
Rough sizes are as follows if i build the machine in mass excavation arrangement, short boom and short stick.
Undercarriage: 500 mm long x 350 mm wide Height to top of counterweight : 330mm Reach : 1000m Total over all length : 1.4m Will be a very similar size to the pc1800 build |
#15
|
||||
|
||||
Re: First R/C build: Cat 6015B 1:14 scale
Why the mass/ex version? I think the greatest feature of the Vario model that sets it above everyone else is its 1400mm reach & it still has oodles of power to dig virgin ground.
What's the longest boom & stick combo offered in the 6015B series?
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#16
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
Have you figured out roughly what the weight will be ?
|
#17
|
|||
|
|||
Re: First R/C build: Cat 6015B 1:14 scale
the standard stick is 3.4M and longer stick is 4.1M, will give slightly more reach but not too much. I am toying with the idea of a few different booms and stick arrangements for it, so i can chop and change as i feel. Maybe even a demolition boom setup
No idea on weight as yet, 100lbs-140lbs at a guess knowing how i build things! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|