Winch set up?

[frizzen]

Here are some suggestions to consider. I have no connection to these companies other than running some type of HeyOk 3-pos winch control in my 1/10 scale SCX10 cherokee, and it has no creep and pulls hard.

For single speed, on a 3 pos switch, that won't creep. These are great.
https://www.rpphobby.com/product_p/hey3pwjst.htm

For single speed, on a 2 pos switch, that won't creep. (It toggles off, in, off, out, off, in...)
https://www.rpphobby.com/product_p/hey2pwjst.htm

Single speed, 3 pos switch, 4 amps of pulling, won't creep, for badass servo winches
http://www.lockeduprc.com/HeyOK-4amp...os-_p_532.html

Variable speed, 3 pos switch or stick, 10 amps, a reversable brushed esc, not a huge deadband but might program, way cheaper.
https://www.amazon.com/Hobbypower-Br.../dp/B00DU49XL0

My dragline runs the original, but hacked, boards from the hitec hs-645mg servos that i converted to continious rotation. The servo was rated for 2.5 amps stalled, but have a tight deadband so setup is a pain to avoid creep. Free with servo, upgradable to better options when one smokes. These are variable speed, which is really nice when digging