American made Hydraulics and actuators

[bigdogrod]

from magom rc:

Huina 583 loader:

https://www.magomhrc.com/en/huina-58...huina-583.html

full hydro kit with servos and esc, pump, motor, valve block, tubing, oil, and alu brace : 600 bucks

https://www.magomhrc.com/en/huina-58...huina-583.html

same kit without servos, motor and esc: 548 bucks

what's your price, and any pics?

[mbudz10]

I added attachments to the post but I do not see the pictures either. I will do my best to post some pictures. I have attached them again, hopefully it works. As far as price goes I would like to get it lower than magomhrc prices. Dont get me wrong though, I do think those prices are decent. But there is the shipping costs and the dreaded waiting time lol. I think it would be awesome to have a hydraulic rc company based here in the states.
I would also like to be a little more "scale" than the cylinders that I can find on the internet and such. I am also in the process of creating CAT look a like cylinders which are smaller than the ones I have made or can be bought at reasonable prices.

[mbudz10]

https://imagizer.imageshack.com/img923/1748/59X9eo.jpg
https://imagizer.imageshack.com/img924/3889/jo0JwH.jpg
https://imagizer.imageshack.com/img924/4996/pyBCRg.jpg
https://imagizer.imageshack.com/img924/6299/dbEIpH.jpg
https://imagizer.imageshack.com/img922/2650/keoXdE.jpg
https://imagizer.imageshack.com/img924/3010/utSwpZ.jpg
https://imagizer.imageshack.com/img923/8260/5wlT3m.jpg
https://imagizer.imageshack.com/img924/5248/SwIsNh.jpg
https://imagizer.imageshack.com/img923/5682/K7OiXz.jpg

[bigdogrod]

looks really good

[mbudz10]

Thank you sir. I tested one of the cylinders and it pulled 20lbs on the fish scale @ 10 bar with the smaller motor in the pics. I just installed an 1/8 scale brushless motor and oh my! I don't have the gauge on but it blew off the pressure line when I gave it 75% throttle. Had to have been around 30 bar. I am quite surprised as I am a newbie when it comes to a lathe and mill. I know how to 3d model and such so its kind of easy for me when its on paper but still surprised. I think if the housing were steel it would pump better. I can tell the aluminum housing wont last nearly as long as a steel one.