|
|
|||||||
| Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
03-01-2011, 12:51 AM
|
||||
|
||||
Re: The Daycab
Any putty that is a "One part" putty, meaning you don't have to mix it with a catalyst WILL crack and shrink. The evercoat for $40 will keep forever as long as the cap is on tight, so it will not go to waste, eventually you will find a use for it.
Basically it boils down to this, if you want it done right, and so that in a year or more it still looks the same, then spend the $40 and get the good stuff, if you don't care what it looks like in a short time then go with the cheap stuff. But keep in mind it don't matter who makes it, if it is a one part putty it WILL crack and shrink. ~Mike~
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Mike "DREAMWEAVER" Johnson To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. RIP FreddyGearDrive 2-12-59/12-19-11 Rims and Tanks by ihbuilder / Grill and Visor by Brian in PA / Mirrors, Front and Rear Bumper, Back of Cab Lights, and Steering Arms by tc1cat / Fenders by Stylin n Profilin / Frame Rails by The Late Freddy Gear Drive 
|
|
#2
03-01-2011, 07:53 AM
|
||||
|
||||
|
Re: The Daycab
yea like mike said
 I had a can of evercoat sitin over 20 years , funny I finally used it up on my 9370 dump build last year . find a auto paint supply , I don't remember it costing that much  then my memory could be asleep yet   Steve
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
