RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's General Discussion. > Get it out of your system! HERE!

Get it out of your system! HERE! You have a gripe,bone to pick, Tamiya vs Wedico or just have to let it out! THIS IS THE ONLY PLACE TO DO IT!


Reply
 
Thread Tools Display Modes
  #1  
Old 03-02-2011, 08:59 AM
tc1cat's Avatar
tc1cat tc1cat is offline
Super Moderator
 
Join Date: Aug 2010
Location: Northern Indiana
Posts: 1,318
tc1cat is on a distinguished road
Default Re: Stupid mfu that keeps shutting down

Are you running LiPos in the truck? My Futaba 4 channel 2.4 does the same thing. If I keep the throtle stick just forward of nuetral the truck will run fine until I forget and go to complete dead center on the stick and then it starts acting up again. It is the radio and not the MFU. Ask Travis about this. He told me it has to do something with the fail safe setup in the radio.

Lynn
Reply With Quote
  #2  
Old 03-02-2011, 10:48 AM
FreddyGearDrive's Avatar
FreddyGearDrive FreddyGearDrive is offline
Admin RIP FGD 2-12-59/12-19-11
 
Join Date: Aug 2010
Location: Niagara falls,NY
Posts: 735
FreddyGearDrive is a jewel in the roughFreddyGearDrive is a jewel in the roughFreddyGearDrive is a jewel in the roughFreddyGearDrive is a jewel in the rough
Default Re: Stupid mfu that keeps shutting down

Quote:
Originally Posted by tc1cat View Post
Are you running LiPos in the truck? My Futaba 4 channel 2.4 does the same thing. If I keep the throtle stick just forward of nuetral the truck will run fine until I forget and go to complete dead center on the stick and then it starts acting up again. It is the radio and not the MFU. Ask Travis about this. He told me it has to do something with the fail safe setup in the radio.

Lynn
That happened to me.It was the radio, I think they should put a few more functions on these radios! It's beyond me why no one is buildin a radio JUST for us?? It took me days to git my atlas truck to work proper like w/a futaba 9 channel. Was ready to burn both of them.
Get away from it for awhile & let your head clear,then giver another shot!
Good luck!
FGD
Oh! Also had a bad servo one time that gave me a real run for it!
Might want to unplug one servo at a time,& try it.If all else fails.
Reply With Quote
  #3  
Old 03-02-2011, 07:41 PM
heavy_duty's Avatar
heavy_duty heavy_duty is offline
Green Horn
 
Join Date: Aug 2010
Posts: 256
heavy_duty is on a distinguished road
Default Re: Stupid mfu that keeps shutting down

Lynn.I am running regular batteries,non lipo,s.I will try that trick with the dead center issue.
FGD, thanks for the advice.I did try that trick with removing one servo led one at a time.
Funny thing is,once this sucker runs,I drive it around the basement,in large circles,and I wait for it to sputter and then it dies,restarts,dies.I then pick it up.check battery voltage and I even tried to put a spektrum capacitor in the battery slot.No luck.I will stay at it and keep you all posted on what I find.THANKS EVERYONE for your support.This is a great board.Proud to be a member.

Ed
Reply With Quote
  #4  
Old 03-03-2011, 05:12 PM
Stepside's Avatar
Stepside Stepside is offline
Super Moderator
 
Join Date: Aug 2010
Location: Pittsburgh, PA
Posts: 668
Stepside will become famous soon enough
Default Re: Stupid mfu that keeps shutting down

Ed,

Jimmy had this w/ his black 379 and sent the MFU back to tamiya... they gave it a good report and sent it back... Jimmy put a different radio on it and it was a night and day difference.

Do you have another radio system to trouble shoot with?
__________________
"If you build it, they will come"
East Coast Mini Truckers


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:42 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.