![]() |
|
Welcome New Members A place to introduce yourself to the membership. |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
Hello all!!
Just gettin my feet wet with the rig scene, been around R/C most of my life but have always been running circles!(oval racer). Now I have become interested in these real nice trucks! I have had a very small collection ...... starting .. ![]() A Knight w/alum. around and the MFU. Tamiya's flat bed w/light kit & legs. A Globetrotter FH12 stock except bearings A MAN TGX A Tamiya 3-axle Reefer trailer I am, now starting my 1st "custom" build, a R620 Scania stretched to 30" with 3 axle, single steer car hauler deck. Using Freddy for the rails and some other goodies, RC4WD for winch & drive shaft, trying to come up with a suitable lift system for the deck??? And some Knight Hauler tanks/boxes & running boards to fill in all the open space. I picked up a set of the wide fronts and a bunch of other goodies. Now for most of ya this is no big deal, and you all have prob. seen this build b4? But being the 1st real 1 for me, I figured baby-steps was a good way to start...? So as soon as the rails R done from Freddy then I will start mocking up all this mess and then maybe even post a pic. or 2 of my maiden build?? I am learning as I go so if any of U wanna interject, PLEASE do!! ![]() I would appreciate the help/advise!! -Mike |
#2
|
||||
|
||||
![]()
Welcome!!! Cant Wait for the build.
|
#3
|
||||
|
||||
![]()
Hey Mike glad to see ya around. Can't wait to see a few of your collection and also can't wait to see the start of that roll back. Lemme know whenever you get your measurements on what we talked about and I'll be glad to help ya.
![]()
__________________
~Tyler~
RockSolidCustoms |
#4
|
||||
|
||||
![]()
Yeah, U bet!!
It will be a few weeks, but I will get there!! ![]() I was gonna throw a few pics. up but their nothing special.... |
#5
|
||||
|
||||
![]()
Gonna try for the 1st time as well to work some styrene too!!
Should be ...... interesting ..... ![]() I have a "Italian" temper with "sausage" fingers!! ![]() ![]() My wife says.... either its glued fingers or butterfly tape?? ![]() This is a WHOLE new road for me!!!! |
#6
|
||||
|
||||
![]() Quote:
![]()
__________________
~Tyler~
RockSolidCustoms |
#7
|
||||
|
||||
![]()
Well I sure do appreciate that!!!
And I'm sure a question or 2 will surface. ![]() THANKS- |
#8
|
||||
|
||||
![]()
Welcome to the forum Mike.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Mike "DREAMWEAVER" Johnson To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. RIP FreddyGearDrive 2-12-59/12-19-11 Rims and Tanks by ihbuilder / Grill and Visor by Brian in PA / Mirrors, Front and Rear Bumper, Back of Cab Lights, and Steering Arms by tc1cat / Fenders by Stylin n Profilin / Frame Rails by The Late Freddy Gear Drive |
#9
|
||||
|
||||
![]()
Thanks DreamWeaver!!
|
#10
|
||||
|
||||
![]()
I guess I need to go nuts for a bit here and rack-up my thread post tally??
I have some parts a guy is lookin for(glorydays24). But I can't post to his thread until my count is up.. ![]() ![]() So mikeymagz is goin post-al!!! LOL! ![]() |
#11
|
||||
|
||||
![]()
Just noticed.....
rockNmayhem Happy Birthday!! prob. late .... but bet'r n not at all..... ![]() |
#12
|
||||
|
||||
![]()
Hello welcome to the forum
![]()
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#13
|
||||
|
||||
![]()
Thanks!!!
Gotta say... this is a pretty "welcoming" forum!!! Usually takes forever to fit in!!! And I'm a big greenhorn around the rig-builders here, but I really want to learn and try a few builds myself! |
#14
|
||||
|
||||
![]()
Welcome aboard Mike. And I got your PM, I sent one right back atcha LOL!!!
Big John ![]() ![]() ![]()
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. YOU WANTED THE BEST AND YOU GOT THE BEST THE HOTTEST BAND IN THE WORLD...KISS!!!! |
#15
|
||||
|
||||
![]()
Got it!
----returned one ![]() |
#16
|
||||
|
||||
![]()
To all who read....
It was brought to my att. a few posts back that I might have sounded misleading? I was wandering through the forum and stumbled onto a person looking for Knight parts. I went to post that I had what he was looking for but could not because of low repy-count. I understand why the moderators set it up that way and respect that. I'm here for the long haul to learn, laugh, have some fun, make some friends, and get involved in a very cool new avanue of R/C! I am not here to just sell items. These parts are extras I had from this build I'm working on right now. I'm sorry for giving the wrong impression and I meant NO harm by the posting. Respectfully, -Mike |
#17
|
||||
|
||||
![]()
Hey Mike you still made it in time, I even still got an hour to call my birthday lol.
![]()
__________________
~Tyler~
RockSolidCustoms |
#18
|
||||
|
||||
![]()
True....
I never saw it that way until it was brought up. MY fault...... ![]() ![]() ![]() (feelin pretty crappy about it....) ... I have all the necessary parts packaged up now and their going out to Freddy on Mon. He is going to make my rails and correct my faulty 3rd drive axle and hopefully I can get him to build a few goodies too!! ![]() Mike |
#19
|
||||
|
||||
![]()
No problem Mike just lemme know and I'll get on it for ya again.
__________________
~Tyler~
RockSolidCustoms |
#20
|
||||
|
||||
![]()
very good, thanks!
Good night and Happy Easter to everyone!!!! Gotta go hide eggs n stuff with the wife or I'm going to have 4 angry kids in the AM!! ![]() ![]() ![]() ![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|