![]() |
|
International and European Truckers club This is a place for all non US Truck clubs to post up their events. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
For those who are interested, the map is of the city of Groningen, in the north of the Netherlands.
![]()
__________________
Greetings from Holland, William |
#2
|
||||
|
||||
![]()
A material container with some tools.
![]()
__________________
Greetings from Holland, William |
#3
|
||||
|
||||
![]()
The next model is a Scania 12x4x6 heavy transport tractor.
It is used with a special build lowloader with extra long neck. This is for better weight distribution. You also notice the cut off roof, which is a common thing here in Holland, It's allowed to drive with the boom of a crane or pile rigger over the cab, as long as you don't go higher then 4 meters. This delivers some special trucks, often the cab of a car carrier is used, because they are low, so you can put a car over the roof. There are lot's of small companies here in Holland that make these conversions. ![]()
__________________
Greetings from Holland, William Last edited by trilliwilli; 08-06-2011 at 06:49 PM. Reason: 10x4x6 should be 12x4x6 |
#4
|
||||
|
||||
![]()
A detail of the nice paintwork of this truck.
![]()
__________________
Greetings from Holland, William |
#5
|
||||
|
||||
![]()
Here one from the back of the cab. The tower is a low version, and the bullbar is to protect the cab for the crane boom.
![]()
__________________
Greetings from Holland, William |
#6
|
||||
|
||||
![]()
A Scania 8x4 tractor, this one with the normal cab.
![]()
__________________
Greetings from Holland, William |
#7
|
||||
|
||||
![]()
On the trailer the guidance vehicle, needed for the heavy transport.
![]()
__________________
Greetings from Holland, William |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|