Aeromax Rotating Wrecker

[CustomClod]

Thanks Cowboy!
Brian, yes the boom will telescope as u will see in this post!
Demond, we can arrange that for sure! haha
Ok did some work today and a good bit at that imo.
This is delrin drilled and tapped in the second section of boom that will telescope


The lamp rod (threaded rod with the center drilled out) Holds the motor on one end and has delrin in the other drilled and tapped to move the third boom stage


This is the third stage which is the final stage delrin tapped and jam nutted to make it move.

[CustomClod]

I then made a little test video after assembly. The boom still needs to be adjusted but im waiting for the new drive motor to arrive.
http://www.youtube.com/watch?v=O9NuE...ature=youtu.be

Then i managed to drill and bolt the boom in place on the boom base and am finally starting to make some head way on this thing.


These are with the second stage section in



Hope the video turns out alright.
Thanks for all the compliments guys and gals. It really helps keep me motivated to push forward! Let me know what you think
Scott

[CustomClod]

Made a video this morning to test the rotation unit under the weight of the assembled boom.
http://www.youtube.com/watch?v=M46uI...1&feature=plcp

Works great in my opinion. Also took another pic before the video haha

Let me know what you think! Thanks for looking
Scott