Bruder Cat Excavator Threaded Rod

[edwalsh18]

Originally Posted by Jigglepin

Hi,

I tried threaded rod first also, but with some help i ended up doing it this way, please take a look at the link, it may help, or give you some ideas.

Happy building

http://www.scale4x4rc.org/forums/showthread.php?t=66312

Hey JP thanks for the reply! great write up! i have seen almost every servo/drill bit setup on the internet (even in german and french forums) and that one finally painted the picture for me(mainly because i am slow) ok now even more i want to see someone if not me use a yoke to mount the bit to the servo so servo can be mounted stationary. i dont want my servos to move.

also JP if you have any info on your threaded rod attempt i would be interested in seeing what went wrong and what went good. i want to see if geared motors with threaded rod would reduce "slop"(i think thats the term). i seen in your video when changing directions the servo is going for a moment and bit is not moving. also, i want more power/speed. thanks again for response and any info u might have