Re: Wedico 966G Problems
It's quite a snug fit, the reservior to the pump and the tank could 2 or 3 mm from the pump wall & still have a sealed union.. although if the o ring was nicked when installing tank, it might drip. A smear of white lithium grease works a little better than oil when sliding metal parts over o rings. Also be sure there's no nicks/burs on tank lip.
The kinked hose on tank, cut it out & re install. The tank needs to breathe!
I was trying to decipher where the two hoses from the tank went, but they disappear to the back.. are both hoses open?
The damage o ring on the cylinder would drain that 30ml tank in short order.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!
Joe
|
10-24-2012, 04:12 PM
Threaded Mode