Need help on body filler choices.

[Tamiya Cowboy]

Ok that is a Glaze you don't want to get that too thick I use the Green label everyday and I know it says metal glaze on the label it is not I use it on all my body and it has no shrink to it..The Metal glaze filler I use it on plastic everyday and I only have to put 220 or 180 grit scratches in the plastic to make it stick. Rage or rage gold is there best fillers of thick fills but you can get pin holes and some shrinkage with them but you are to use a glaze over them after you get you basic fill done not saying if you dont you did it wrong that is just the way there filler system works. Most of your filling on a toy body is going to be less than a 1/8 inch think the green label is good to 1/4 I would go with the green label you will be very happy with it..