Menck M90 german rope excavator 1:16

[Finster]

Originally Posted by Seilbagger

Hi Jim,
...snipped...
One channel is for switching two controllers (switcher ON/ON wit a servo) from the drums to the driving motors

Wolfgang,

When you say two controllers do you have 2 radio receivers in the model or is it another device which you switch functions? If it's another device where did you get it?

Thanks in advance

[pumptech]

Looks great and runs perfect !!
Great job Wolfgang

[Seilbagger]

Originally Posted by Finster

Wolfgang,

When you say two controllers do you have 2 radio receivers in the model or is it another device which you switch functions? If it's another device where did you get it?

Thanks in advance

Hi Brian,

i have used a switcher like this:



switching with a servo. The cables from controller goes to the middle, by switching the connection is on the right side or on the left side, once to the motors for driving, other for the drums.

If you have any problems to understand, i will show you a picture.

[Finster]

Thanks for the explanation. I misunderstood what you meant in your earlier post, but it makes sense now.

[Seilbagger]

Originally Posted by Finster

Thanks for the explanation. I misunderstood what you meant in your earlier post, but it makes sense now.

No problem, its my perfect english