53ft van and reefer trailers

[Tea wrex]

I think for aesthetics it should be a euro setup on the rear axles. Or split axle! Just my thoughts based on how long they are. But great work man!

[1985 kenworth]

here it is hooked to allen(goose19) truck at our show last weekend ,still need to add reflective tape and lights to it will have some updated pics this week sometime as with updated pics of ZEUS'S stainless Great Dane reefer trailer

[1985 kenworth]

here are some updates on both trailers


added the trailer lights(cord) the tamiya one looks to be ok for length .i taped it down and with the slack at the front i should be able to pull this trailer with one of my long wheelbase trucks
scratchbuilt the rear bumper and starting to add the details like the reflective tape .still need to drill and paint and install the rear doors then this trailer will be finished
the roof is not attached yet but here is where it stands now

[1985 kenworth]

used the regular box trailer floor to work on the chassis frame for my stainless Great Dane reefer trailer for ZEUS.here i cut and reinforced the frame and added the airride suspension.and assembled the front headboard to the floor of the trailer and assembled the ribbed soon to be polished sides to the trailer,then i measured and installed the rear suspension to the chassis of the trailer and dry fitted the rear aluminum fenders and the custom rear aluminum trailer bumper from True Scale R-C and just took a few pics hooked to a truck .here are the pics hope you like them

[1985 kenworth]

primed and put a few coats of purple on the Thermo -King sb300 unit and measure to install on the headboard



using temporary bolts and nuts until final assembly then i will be using the m3 with lock nuts

[1985 kenworth]

more updates soon as i am nearing completion of both of them..thanks

[1985 kenworth]

got my order of custom mudflaps from xclusive .the purple danes are for well i think you guys know..

[rc_farmer]

I love the trailer, any plans to have a few kits made.....also where did you get the thermo king unit?

[wolfws6]

The best thing about is it looks to scale!!! Awesome job!!!

[BRICKNICK]

Looking great Dwayne....I'm very intrigued.

[Radio Control Trucker]

Very nice Dwayne. I'm lovin' the builds.

- RCT

[1985 kenworth]

here are the final updates to my scale 53ft van trailer .just have to drill and tap the roof on the trailer but other than that it is pretty much finished ,now if you look at the trailer you will see a gap on the underside of the trailer and others have been saying it needs to be filled in when actually it doesn't.if you look at real trailers the only ones that have a full frame on them are 4 and 5 axle flatbed trailers or the container chassis but the regular van trailers have the rear suspension ..which slides and the landing gear only so here are the updated pics of this trailer complete with Wabash decals and a few roof patches because of my rookie forklift driver,who put the mast through the roof of this brand new trailer.i did not fire him because...well it was me..lol
also added the body rub rail for those drivers that can not back beside you without rubbing the trailers

[1985 kenworth]

[1985 kenworth]

i got some new ones made to the right scale in height and i will be picking them up soon they are around 8" high and the actual height of the real trailer box is 9' 6" and measured from the ground up they are allowed a maximum height of 13' 6'' high and i calculated it and that would make the scale height of these trailers 8.1 inches high and the new ones coming are right around that mark

[kingbob]

How did i miss this??

Love the one piece folded sheet fpr the sides and front! Makes it look so clean!

I finished my 53 footer for Optimus yesterday, came in at 1150mm long, not including reefer. The side panels i used were actually stainless steel, i couldnt find the ribbed pattern in aluminium. Its made by Rimex metals, should be available in the US.

I worked the sizing out pretty much the same:
1:1
53' long
13'6" overall tall
110" inside height
102" wide

In 1/14
1153mm (not including reefer)
293mm tall total
199.5mm tall interior (box)
185mm wide

They're the measurements my trailer is built on. I did lower the trailer a bit as well to get the wheels closer to the frame for a more scale appearance. Basically re-drilled all the suspension mounting holes 10 or 15mm higher.

[1985 kenworth]

got the first coat of paint on the suspension for Zeus's Great Dane Stainless Reefer trailer.i will bare metal foil the side grill's on the reefer unit like i did for Optimus Prime Trailer

[JoseFL10-4]

Good great, where u find the reefer unit?

[Stuff]

looking real real good!

[1985 kenworth]

been awhile but i have some updates on Zeus's Great Dane Stainless trailer

[1985 kenworth]

polished the trailer bumper and installed the ZEUS nameplate which will be lit up with l.e.d.s. and installed the lenses going with the black bezels


also i repainted the suspension frame and reinstalled the suspension and i installed the awesome polished fenders i got from Wayne (Flatdeck) and installed them on an angle so i can use the full custom mudflaps i got made from Brian from Exclusive .instead of trimming them to fit the fenders