#81
|
|||
|
|||
Re: First build ,cat D11
Could you tell me where you got the motors and chain from? Thanks!
|
#82
|
||||
|
||||
Re: First build ,cat D11
Motors and chain, sprockets too. I didn't shop around for price that much. I don't know if that was a good buy or not. Didn't look too bad I thought. http://www.robotmarketplace.com/prod...-218-1003.html
And thanks for the complements. I knew going into this a lot of work lay ahead. I didn't realize how much the detail work would involve. But it's fun-at least the tracks were fun,,, for about the first 5, then it got boaring.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#83
|
||||
|
||||
Re: First build ,cat D11
Ok so now I know some things should be kept scale and some things can be cheated on. As I said before the stock I had on hand was about a 1/4" not tall enough for the main track carrier. And I skimped on the brass for the rollers. Between the two it really shows when both come together. . As you can see a lot of daylight between the two. If I had the rollers 1-1/8" and had the track body extend down another 1/4" things would be looking a lot better. I do have room to make the rollers a 1/8" on each side increasing diameter 1/4" for future tweaks. (Might even make them with the acetal instead of dropping the coin on the brass). As I said before this is my first build in something like this and a bit on the learning curve. I'm just not too efficient in guesstimating scale realism for purchasing stock. Once it affects the wallet I learn real quick!!!! Lol!! (Don't we all?) on the flip side the dozer blade arms will hide it all,, lol,,,,
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#84
|
|||
|
|||
Re: First build ,cat D11
Cooper-since you are not building a scale model, don't worry about the small details. If you hadn't mentioned the small rollers I probably wouldn't have noticed. I think the grousers (being thick and tall) looks worse than the small rollers. But that's just me. Everyone has an opinion. Make the model to please YOU. Since you will spend hundreds of hours over this model you will know every little mistake that is made. Most people won't notice. I always said to look at a machine from a side-view and pick out a few features that stand out and try to make the model accurate to these features and you will have a good looking model. But remember, a model that looks great but doesn't work is useless. Try to make something that looks good but works GREAT!! You are doing good, keep at it.
|
#85
|
||||
|
||||
Re: First build ,cat D11
Hey model man, thanks for the input. I agree with you about the final outcome to be a workhorse not a showpiece. What I'll be happy with in the end is if someone can just recognize it as being a larger d series cat dozer. If I can accomplish a realism to a d11 by say someone like my wife I'm right where I want to be!! (Although I would show her a pic of a d11 and a d3 , hopefully she sees it!!!! But yes I'm striving for a workhorse. Going to be used to build and maintain our 1/14 scale short course trophy truck racetrack in between races. Down at our Riverlot it started out as me and the neighbor playing in the sand by river-- that morphed into about 10 of us having several races per weekend and a full racetrack with guide rails, berms, jumps, seating for spectators, watering system,,ect,,,, as I look back I'm starting to realize my addiction,, ahh still in denial!!! Lol!!!
So you think the grousers look big? For me it's like the signature of a beast, thick and tall, big looking tracks. I think that comes from all the used equipment I've had and always wanting the new stuff but not being able to justify the $200k for new. I may trim the height down some but it's mainly going to be used in sandy/silty soil. And if anything looks like I'm heading in the wrong direction I'm always listening
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#86
|
|||
|
|||
Re: First build ,cat D11
Cooper-your grousers may be okay. That is just the 1st. thing my eyes focus on when looking at your tracks. Right or wrong-I don't have a clue. I have never even seen a D11 in person. I just know they are HUGE!! As I said-build it like you want it and keep cranking out those parts.
|
#87
|
|||
|
|||
Re: First build ,cat D11
Cooper-I don't want to get your thread off topic but you talking about the r/c car track got me going for a trip down memory lane. Here is a track I built behind my house in about 1995. We formed a club and started having races once a month with 25-30 trucks coming every race. We would also have about 10 trucks every weekend to practice and play.
http://i305.photobucket.com/albums/n...ps6fdbd471.jpg http://i305.photobucket.com/albums/n...psaec12898.jpg http://i305.photobucket.com/albums/n...ps2966b541.jpg http://i305.photobucket.com/albums/n...ps4b071d51.jpg If your track is close to this size you will need more than the D11 to maintain it. I used a cub cadet pulling a section harrow and a railroad cross-tie for leveling and a tiller to re-mix the dirt about once a month. It was fun but it was almost a full time job to keep the track in good shape. I would do it all again though because of the good memories. |
#88
|
||||
|
||||
Re: First build ,cat D11
That's an awesome backyard track!!! This is the only pick I could find off hand, the track has grown and been modified since but at least you get an idea. It's for 1:14 scale trucks.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#89
|
||||
|
||||
Re: First build ,cat D11
A little better pic, and in my opinion a good build thread covers all aspects, like where the equipment is going to be working
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#90
|
||||
|
||||
Re: First build ,cat D11
Oops
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#91
|
|||
|
|||
Re: First build ,cat D11
Thanks for the comments-sorry I don't have a picture showing the entire track but you can get an idea of the size. Your track looks to be well kept and I can't help but notice the lake. I was thinking the way some people drove on my track that if they were on your track they would have surely wound up in the water. Your D11 should be right at home there.
|
#92
|
||||
|
||||
Re: First build ,cat D11
Got some more done, i still have to machine in the details and round stuff but this gives an idea of the torsion bar.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#93
|
||||
|
||||
Re: First build ,cat D11
Oops, darn iPad!!
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#94
|
||||
|
||||
Re: First build ,cat D11
Just a side shot, will start on the sprocket drive mounting and location.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#95
|
|||
|
|||
Re: First build ,cat D11
Looking better with each picture!!
|
#96
|
||||
|
||||
Re: First build ,cat D11
Sweet...great job!!!
|
#97
|
|||
|
|||
Re: First build ,cat D11
Hi you are doing a great job look real good so far keep it up. Ed
|
#98
|
||||
|
||||
Re: First build ,cat D11
Got photobucket working
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#99
|
||||
|
||||
Re: First build ,cat D11
Still trying to figure out what to copy/paste
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#100
|
||||
|
||||
Re: First build ,cat D11
Ok, got it figured out, img code. Lil'giant , finally got it figured out, should be hosting photos from now on. I'm technologically challenged when it comes to iPads, computers. And to think I'm the IT guy at work!!!! Lol!!! Small family business, but I do get employee of the month a couple times a year!!!!lol!!!! (Only have three on payroll, wife mom and me. ).
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|