#141
|
|||
|
|||
Re: First build ,cat D11
Looks very good can wait to see it in the dirt.
|
#142
|
||||
|
||||
Re: First build ,cat D11
Quote:
Cheer's, Neil. |
#143
|
||||
|
||||
Re: First build ,cat D11
Starting on the blade. It would be so nice to make a straight pusher blade, I could just stick sides on and be done. But,,,,, I've got no experience in metal fabrication, so what fun would that be. These are the first two pieces of metal I have ever sheared or rolled. I'm planning on making the carry/dump blade with cutting edges. I don't think I'm going to get too detailed with all the bends but would like to make the ends somewhat realistic. My welding skills are,,,well we will have to see if I post any of them. . Lol!!! I weld like an old hit n miss engin, sometimes good and sometimes bad in the same bead. I originally was using hard rubber grommets for the degree of movement in the blade arms. Had to go to hardware store this morning and found they have rod ends. I cut off the threads and ground to close to round then pressed them into the hole. They will definitely not be coming out. But now I have a nearly indestructible pivot point. And got some for the stabilizer bar too.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#144
|
||||
|
||||
Re: First build ,cat D11
Quote:
Damm,,, got to go plow more snow!!!!! I was born in Florida and need to get back to the sand and sun
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#145
|
||||
|
||||
Re: First build ,cat D11
When and where, I would like very much to go. Cabin fever in Harrisburg? Let me know, thanks.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#146
|
||||
|
||||
Re: First build ,cat D11
Quote:
http://www.cabinfeverexpo.com/index.html |
#147
|
||||
|
||||
Re: First build ,cat D11
edit : Steve beat me to it
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#148
|
||||
|
||||
Re: First build ,cat D11
Just cut the sides of your blade out of poster board, to find the right shape, then you will have templates to make the rest of your blade.
Cheers, Neil. |
#149
|
||||
|
||||
Re: First build ,cat D11
Figured I need to have some sort of internal support. Using 22guage steel. I figure I can weld onto the blade then together with a couple holes in the back plate. Then I will be able to have a few spots welded to the back as well. Will be able to hide them easily too. Yes I will be doing that Neil, using the cardboard sheet for perishable templates will make things a lot easier for my right angle mind. Always have fits when installing cove moulding on slanted ceilings around corners!!!! And I will definitely be trying to make some time for any shows in or around my area.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#150
|
||||
|
||||
Re: First build ,cat D11
There is a lot of them in your area throughout the yr, you are blessed!
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#151
|
||||
|
||||
Re: First build ,cat D11
Quote:
Cheers, Neil. |
#152
|
|||
|
|||
Re: First build ,cat D11
Cabin Fever is in York PA not Harrisburg just thought I'd let you know. Ed
|
#153
|
||||
|
||||
Re: First build ,cat D11
Just remember , what you are about to see is from a professional metal welder/fabricator. Reality------my welding skills are a work in progress,,, first time welding on such thin material!! I have to trim the sides and build rock guard, cutting edges, mounting brackets but the big idea is done. Well it's definitely a carry blade.
I did get the internal bracing in and it really stiffened it up!! I added a small strip of steel so I will have something to bolt cutting edges to.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#154
|
||||
|
||||
Re: First build ,cat D11
And the bottom side
Topside with tractor
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#155
|
||||
|
||||
Re: First build ,cat D11
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#156
|
||||
|
||||
Re: First build ,cat D11
Oh forgot two, and can anyone say bondo??? Lol.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#157
|
||||
|
||||
Re: First build ,cat D11
Got cutting edge and side edges on. I was going to have a scale bolt on cutting edge, but I decided to save some time and skip that. Now I have to grind welds down and have some automotive metal filler. I guess its like bondo but a little stronger? Maybe it's just a half gallon bucket do jb weld. Lol!! This should be able to have the final outcome pretty smooth and straight, I hope.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#158
|
|||
|
|||
Re: First build ,cat D11
Looking good. Keep up the great work
|
#159
|
||||
|
||||
Re: First build ,cat D11
Boy, you first build guys really know how to show even the veterans up! The Cat D11 is looking very nice, and you are making excellent progress. Keep it up. I never get tired of watching builds like yours come together.
__________________
Nathan |
#160
|
||||
|
||||
Re: First build ,cat D11
So far this little piece has given me the most fits!!!! I'm not an engineer so I figure the mechanics of real machinery is working so use similar. I made this pivot block to where only one set screw will be needed and will be hidden. Gonna have to start thinking about hydros. Where do you guys get your bushings/ seals for piston rods and what size hose and fittings should I be getting? 1:14 scale.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|