|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Re: Mack M75SX
Quote:
Reg , get on your private jet and come down
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#2
|
||||
|
||||
Re: Mack M75SX
few more , need more paint . I got 1 can to test the color The store was closed today oh a lil grease on the cylinder rams werks wonders for masking
still got the grime to clean off the axles and shave a lil off the bottom of the beams I'm going to finish the detail too finally gotta find some more mack emblems . I'm gonna rob the letters off a bruder for the front of the hood possibly the bulldog too
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#3
|
||||
|
||||
Re: Mack M75SX
Quote:
Do you use electrical cleaner to clean the grime away? I used a can of that to clean off the oily grime from my 850 after the cyl leaky mess all over the bottom of the stick & coupler... it was like it was steamed off.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#4
|
||||
|
||||
Re: Mack M75SX
Ether old trick I used when prepping oil pans for reinstall . Never had a leaky oil pan or timing cover yet I just can't get the same stuff I used years ago , seams to leave a bit of oily residue that I have to blow off . electrical cleaner is real good too , I just never have it when need it ether is always on hand this time a year. yes I may try the Vaseline in the Mack logo on the hubs , I want that to stand out a bit .
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#5
|
||||
|
||||
Re: Mack M75SX
almost back together leaving the rims raw aluminum to have a break in color going back to the rc4wd tires just glue the back beads so they don't walk out under a load when turning For the fronts , I have some flexible foam from 3M to try , Just waiting on the applicator .
after thought , its funny to see paint on it
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#6
|
||||
|
||||
Re: Mack M75SX
Looks great Steve!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|