|
Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Technical term needed
Is there a term used for tractors pulling two more behind like this?: http://upload.wikimedia.org/wikipedi...kepackCrop.JPG
(My obvious lack of trucking knowledge on full display here haha!) |
#2
|
||||
|
||||
Re: Technical term needed
Piggyback! At least that's what I call it. http://autotrucktransport.com/services/driveaway/
Cheers, Neil. |
#3
|
|||
|
|||
Re: Technical term needed
Yep that's what it's called
I used to haul a lot that way... Had a few come loose on me also
__________________
Specializing in VW beetle water pumps! RIP FREDDYGEARDRIVE |
#4
|
||||
|
||||
Re: Technical term needed
How did that go over when they came loose? I can't even imagine.
|
#5
|
||||
|
||||
Re: Technical term needed
I always called it piggyback as well. Guys around here say the same...
|
#6
|
|||
|
|||
Re: Technical term needed
Quote:
The whole truck I was driving started to feel like the azz end was loose Got out to check and found a loose saddle on the front truck Second time the saddle slid back till it found a cross member and stopped That was the last time I trusted someone else to tighten the u bolts on my saddles so I started carrying a big azz crescent wrench with me Got lots of looks on the plane when I flew to get trucks
__________________
Specializing in VW beetle water pumps! RIP FREDDYGEARDRIVE |
#7
|
||||
|
||||
Re: Technical term needed
Thanks gents! This will be my first project when the shop is back up and running.
|
#8
|
||||
|
||||
Re: Technical term needed
Any more we get alot of our trucks this way. It's kind of fun to see how long it takes to get a driver in and out of the shop. Every body wants to see the new toys so we drop what were doing someone grabs the crane controls, some body gets to each corner to put in the axles and hang tires if necassary. Usually we can put 1 on the ground ready to drive off in under 15 minutes kinda like a slow NASCAR pit stop lol.
|
#9
|
||||
|
||||
Re: Technical term needed
Who's coming over to turn some screws!?! |
#10
|
||||
|
||||
Re: Technical term needed
Does anyone have pictures of the saddles?
Bryan |
#11
|
||||
|
||||
Re: Technical term needed
Just say when and we can get started. Travis
__________________
AKA "00" Biddle RIP FreddyGearDrive 2-12-59/12-19-11 |
#12
|
||||
|
||||
Re: Technical term needed
man thats some coin. be cool to see when your done. you need to get a assembly line going!!lol
__________________
Grabbin gears and Rollin wheels ! LETS BLOW SMOKE!! Member of the Central Plains Mini Truckers,and a Minnesota road hammer. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Flat bedders do it with chains and straps,but now im yanking 53's To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#13
|
||||
|
||||
Re: Technical term needed
I wish
Cheers, Neil. |
#14
|
|||
|
|||
Re: Technical term needed
Nice!
|
#15
|
||||
|
||||
Re: Technical term needed
Next week end.
|
#16
|
||||
|
||||
Re: Technical term needed
YUP! Im gonna use Trav's machiney bits since mine are burnt and landfilly now.
|
#17
|
||||
|
||||
Re: Technical term needed
I've never seen anything like it, is a very interesting project
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|