RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #161  
Old 05-23-2015, 12:55 PM
rc entreprenøren rc entreprenøren is offline
Newbie
 
Join Date: Jan 2013
Posts: 47
rc entreprenøren is on a distinguished road
Default Re: Volvo A40F

Hello Ari.

This is like the others of your master pices. :-)

Lokking forward to se this finished with paint.

(Have you seen my 374 on the Norwegian forum. ??

It goes in small steps..but i think it`s going to be god when it`s done.:-)
Reply With Quote
  #162  
Old 05-24-2015, 08:11 AM
Hemi1966 Hemi1966 is offline
Journeyman
 
Join Date: Aug 2010
Location: Finland
Posts: 641
Hemi1966 is on a distinguished road
Default Re: Volvo A40F

Quote:
Originally Posted by rc entreprenøren View Post
Hello Ari.

This is like the others of your master pices. :-)

Lokking forward to se this finished with paint.

(Have you seen my 374 on the Norwegian forum. ??

It goes in small steps..but i think it`s going to be god when it`s done.:-)
Thanks
Yes, I've been following your 374 build and it's coming along nicely.
__________________
Ari


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #163  
Old 05-26-2015, 04:10 PM
rc_farmer's Avatar
rc_farmer rc_farmer is offline
Master Builder
 
Join Date: Aug 2010
Location: Arkansas
Posts: 828
rc_farmer is on a distinguished road
Default Re: Volvo A40F

Quote:
Originally Posted by rc entreprenøren View Post
Hello Ari.

This is like the others of your master pices. :-)

Lokking forward to se this finished with paint.

(Have you seen my 374 on the Norwegian forum. ??

It goes in small steps..but i think it`s going to be god when it`s done.:-)
I hope i haven't over looked a link to your build, but would you mind posting a link to your build?
__________________
Giving up is not an option!!!

Rob
Reply With Quote
  #164  
Old 05-31-2015, 12:27 AM
jffhrvstr jffhrvstr is offline
Newbie
 
Join Date: Aug 2010
Location: Utah
Posts: 64
jffhrvstr is on a distinguished road
Default Re: Volvo A40F

Your work is amazing! I can't wait to see more progress pictures!! Keep up the good work!
Reply With Quote
  #165  
Old 06-21-2015, 10:21 AM
Hemi1966 Hemi1966 is offline
Journeyman
 
Join Date: Aug 2010
Location: Finland
Posts: 641
Hemi1966 is on a distinguished road
Default Re: Volvo A40F

I made the cab mounting posts and the cab bottom plate today.

Pretty soon I must decide how I'm going to make engine hood and all the curved cab parts, maybe 3D print...
I've seen some great 3D printed projects here so I know it's possible, but the problem is that I have no idea how to do the 3D modelling of the parts.
Do you 3D experts know if it's possible to 3D scan the 1:50 scale hood and resize that to 1:14, or is it too small to begin.

Here's a rough picture of the hood so you get the idea.







__________________
Ari


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #166  
Old 06-22-2015, 04:21 PM
Madda Madda is offline
Newbie
 
Join Date: Nov 2011
Posts: 120
Madda is an unknown quantity at this point
Default Re: Volvo A40F

Big CAD packages have scale functions so theoretically it is possible. However, I would recommend paying few bucks to a CAD specialist who will model you all the necessary parts and you can print them out in whatever size you need. Then you won't lose details, can print parts separately etc.
Reply With Quote
  #167  
Old 06-23-2015, 08:23 AM
Hemi1966 Hemi1966 is offline
Journeyman
 
Join Date: Aug 2010
Location: Finland
Posts: 641
Hemi1966 is on a distinguished road
Default Re: Volvo A40F

Thanks Madda, that might be the way to proceed

I managed to make the cab side panels today, luckily the cab is basically a simple box, minus the roof so no need for 3D printing there.



__________________
Ari


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #168  
Old 06-23-2015, 05:35 PM
Valdosetti Valdosetti is offline
Newbie
 
Join Date: Mar 2012
Posts: 56
Valdosetti is on a distinguished road
Default Re: Volvo A40F

Hi Ari, I would like to say that I followed all your builds and I believe you transform all your equipment in a peace of art working on metal. You should continue doing it all the way trough in my opinion. But, If you have the Idea of add some plastic parts, then http://www.fumotec-shop.de/modell-ko...b40d/index.php has the parts for cab for sale. also you can take a look at premacon if you want. Definitely way easier, but not even close to what you have made so far.
Reply With Quote
  #169  
Old 06-23-2015, 10:12 PM
tracksntreadslou's Avatar
tracksntreadslou tracksntreadslou is offline
Journeyman
 
Join Date: Aug 2010
Location: Vancouver Island BC
Posts: 583
tracksntreadslou is on a distinguished road
Default Re: Volvo A40F

Hey Ari i did a bit of research on 3D scanners and was thinking the same as you or maybe a possible purchase of one ..the technology is not quite there for the do it your selfer but very close ..detail and quality have a bit further to go ..There are some companys that do sell 3D cad drawing of complete construction machines..I was looking for the Volvo A40 recenlty but only so far came up with this one http://www.3dcadbrowser.com/download.aspx?3dmodel=85249 there are many more of these types of web sites avaiabe to down load..might send you on the right track ..BTW ..looking awsome
Reply With Quote
  #170  
Old 06-24-2015, 10:06 AM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: Volvo A40F

Ari, why don't you just make it out of aluminum? You have great metal skills and a TIG so it shouldn't be impossible. At least then you are not using plastic on a model in which you have put so much effort into making from metal. Just my 2 cents. I know you can do it!
Reply With Quote
  #171  
Old 06-24-2015, 09:58 PM
Trucker_Jo's Avatar
Trucker_Jo Trucker_Jo is offline
Green Horn
 
Join Date: Aug 2012
Location: Pacific Northwest,Merica'
Posts: 285
Trucker_Jo is on a distinguished road
Default Re: Volvo A40F

I agree with Reg, I believe the skills needed are there!
__________________
Jarrett
Reply With Quote
  #172  
Old 06-30-2015, 07:02 AM
Hemi1966 Hemi1966 is offline
Journeyman
 
Join Date: Aug 2010
Location: Finland
Posts: 641
Hemi1966 is on a distinguished road
Default Re: Volvo A40F

Thanks guys for your advice and thoughts

I actually have made some frame arches for the hood earlier. I will try to go on with that way, but I not sure how that will turn out

Got some parts for the cab done, the fire wall and the rear wall.



__________________
Ari


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #173  
Old 06-30-2015, 08:02 AM
tc1cat's Avatar
tc1cat tc1cat is offline
Super Moderator
 
Join Date: Aug 2010
Location: Northern Indiana
Posts: 1,318
tc1cat is on a distinguished road
Default Re: Volvo A40F

Awesome build !! I agree with Reg and Trucker Jo. Try to make the cab from metal. From your past builds, you have the skills to do it. It just takes a lot of nerve to try. You might want to go with brass or copper instead of aluminum. I wish that I would have tried to make the cab on my Studebaker US6 out of metal instead of modifying a Tamiya truck cab.
__________________
LYNN
Reply With Quote
  #174  
Old 07-04-2015, 08:52 AM
Hemi1966 Hemi1966 is offline
Journeyman
 
Join Date: Aug 2010
Location: Finland
Posts: 641
Hemi1966 is on a distinguished road
Default Re: Volvo A40F

I made more parts for the cab, the roof and the door. And while I had the brass plate on the machine table, I made the upper shock bracket

In the picture there's also the wheel arc that I made earlier.





__________________
Ari


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #175  
Old 07-05-2015, 10:14 AM
speedy8305 speedy8305 is offline
Apprentice
 
Join Date: Aug 2012
Location: Port Wentworth, GA
Posts: 408
speedy8305 is on a distinguished road
Default Re: Volvo A40F

looks good Ari keep it up you'll be complete before you know it. Then snap a pic of all your machines together
__________________
Steve
Reply With Quote
  #176  
Old 07-19-2015, 04:14 AM
Hemi1966 Hemi1966 is offline
Journeyman
 
Join Date: Aug 2010
Location: Finland
Posts: 641
Hemi1966 is on a distinguished road
Default Re: Volvo A40F

I made some parts around the cab





__________________
Ari


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #177  
Old 07-19-2015, 01:39 PM
liftmys10 liftmys10 is offline
Apprentice
 
Join Date: Sep 2012
Location: Los Angeles, CA
Posts: 473
liftmys10 is on a distinguished road
Default Re: Volvo A40F

Great job!!
Reply With Quote
  #178  
Old 08-05-2015, 11:20 AM
ederson's Avatar
ederson ederson is offline
Newbie
 
Join Date: Jan 2014
Posts: 34
ederson is on a distinguished road
Default Re: Volvo A40F

belo trabalho
Reply With Quote
  #179  
Old 08-05-2015, 11:23 AM
ederson's Avatar
ederson ederson is offline
Newbie
 
Join Date: Jan 2014
Posts: 34
ederson is on a distinguished road
Thumbs up Re: Volvo A40F

sou admirador das suas obras
Reply With Quote
  #180  
Old 08-19-2015, 11:42 AM
Hemi1966 Hemi1966 is offline
Journeyman
 
Join Date: Aug 2010
Location: Finland
Posts: 641
Hemi1966 is on a distinguished road
Default Re: Volvo A40F

I made some parts for the fenders. So that it wouldn't be too easy both sides are different, on the right side the air filter housing comes thru the wheel arc.






__________________
Ari


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:22 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.