|
General Discussion A place to post off topic discussions. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Re: Major glitching on 2.4 gHz
Same thing with the China kat. tracks,slew are
Chinese esc. The pump is on a e-flite 60 as the main Esc. I also replaced the tower pro servos to better ones |
#2
|
|||
|
|||
Re: Major glitching on 2.4 gHz
Ok, I spent some time on this yesterday. It seems that letting the sticks go and return to neutral will cause this the most. But, use of bucket seems to be the worst, followed by main boom.
It does not seem to do it as much for the arm as the boom which is same stick as bucket.... It hits the tracks first, the rotate second, and the boom next. Sometimes it hits every control function. I started to put in a whole different radio, but it does not have 2 centering sticks. As I think on this, I think I will go ahead and still try that to eliminate the radio over the servos and wiring inside the machine. Have not had leaks, a spill, but no leaks. Don't think the servos got wet, but will check |
#3
|
|||
|
|||
Re: Major glitching on 2.4 gHz
Yes one servo is causing this, the one for pressure relief. Now to figure out the proper replacement.(s)
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|