RC Truck and Construction  

Go Back   RC Truck and Construction > R/C Truck's Manufacturers/Venders/Retailers > RCP’s Aluminum Gravel Boxes and Accessories

RCP’s Aluminum Gravel Boxes and Accessories Welded aluminum dump boxes and more


Reply
 
Thread Tools Display Modes
  #1  
Old 08-31-2016, 02:05 PM
t-meggs t-meggs is offline
Newbie
 
Join Date: Aug 2016
Posts: 14
t-meggs is on a distinguished road
Unhappy Transmitter control options

Ok so i got the dump working great.

I have a 6 channel tx/rx and want to control the up/down from it. When I attach the dump motor to any channel it only works in one direction and then have to swap black for red for it to work in opposite direction. I tried using white from rx but does nothing.

Tried various combos and doesn't work.

dump motor is standard 2 wire red/black. rx standard red/black/white.

I know it's something simple, but I am losing it.

Definitely due to the nut house.

T-meggs
Reply With Quote
  #2  
Old 08-31-2016, 02:39 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Transmitter control options

What esc are you using??
You do know you need a second esc to control the
Dump motor

Last edited by bigford; 08-31-2016 at 02:58 PM.
Reply With Quote
  #3  
Old 08-31-2016, 06:53 PM
t-meggs t-meggs is offline
Newbie
 
Join Date: Aug 2016
Posts: 14
t-meggs is on a distinguished road
Default Re: Transmitter control options

Nope that was the part that was missing. I had no instructions with this. I have been reading and Reg just emailed me.

Just not sure how to set up with second esc?

off of same transmitter?
Reply With Quote
  #4  
Old 08-31-2016, 08:20 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Transmitter control options

Unplug the red wire off the dump motor esc then plug the esc into a spare channel on the rx. Then you need to splice the power leads together. My dump trailer set up runs 3 esc this way. 1truck) 2dump) 3tarp)
Reply With Quote
  #5  
Old 08-31-2016, 08:22 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Transmitter control options

I use a dx9 with a right dial knob that I use to raise and
Lower the box and a 3 way toggle for the tarp
Reply With Quote
  #6  
Old 08-31-2016, 08:49 PM
t-meggs t-meggs is offline
Newbie
 
Join Date: Aug 2016
Posts: 14
t-meggs is on a distinguished road
Default Re: Transmitter control options

ok will try. thanks as i am new to the big rigs. thanks for being patient.
Reply With Quote
  #7  
Old 08-31-2016, 09:18 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Transmitter control options

It's all good we were all new at first..
Reply With Quote
  #8  
Old 09-01-2016, 08:51 AM
t-meggs t-meggs is offline
Newbie
 
Join Date: Aug 2016
Posts: 14
t-meggs is on a distinguished road
Default Re: Transmitter control options

uggh. ok so i did the following.
1. connected esc lead to ch6. removed red wire. leaving white/black in correct alignment.
2. cut of tamiya battery plug and spliced the red/black together.
3. made sure switch is in on position.
4. attached esc out leads orange/blue to dump motor.

result: nothing. yes turned tx on and truck on. Second ESC shows red power light on but when i move dial it dims and brightens. no dump motor power at all.
Reply With Quote
  #9  
Old 09-01-2016, 09:07 AM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Transmitter control options

Both esc are on?
Reply With Quote
  #10  
Old 09-01-2016, 09:09 AM
t-meggs t-meggs is offline
Newbie
 
Join Date: Aug 2016
Posts: 14
t-meggs is on a distinguished road
Default Re: Transmitter control options

yes sir
Reply With Quote
  #11  
Old 09-01-2016, 09:22 AM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Transmitter control options

Will the truck drive like normal and just not dump?
Try swapping the esc around dump on the drive
And drive on the dump esc
Reply With Quote
  #12  
Old 09-01-2016, 09:37 AM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: Transmitter control options

Could you post some pictures of the wiring? What esc are you using on the dump? It is for a brushed motor right?
Reply With Quote
  #13  
Old 09-01-2016, 09:40 AM
t-meggs t-meggs is offline
Newbie
 
Join Date: Aug 2016
Posts: 14
t-meggs is on a distinguished road
Default Re: Transmitter control options

have to run out for a bit.

yes brushed motor esc tamiya TEU-302bk

will post pics and further when i return.

gotta go earn some $ to pay for my toys.

lol.
Reply With Quote
  #14  
Old 09-01-2016, 09:52 AM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Transmitter control options

Doing that right now in traffic
Reply With Quote
  #15  
Old 09-01-2016, 10:18 AM
TRUCKMAKER's Avatar
TRUCKMAKER TRUCKMAKER is offline
Big Dawg On The Bone
 
Join Date: Aug 2011
Posts: 1,652
TRUCKMAKER is on a distinguished road
Default Re: Transmitter control options

2. cut of tamiya battery plug and spliced the red/black together.

Hopefully you spliced red to red and black to black not red to black.
Reply With Quote
  #16  
Old 09-01-2016, 10:27 AM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: Transmitter control options

Quote:
Originally Posted by TRUCKMAKER View Post
2. cut of tamiya battery plug and spliced the red/black together.

Hopefully you spliced red to red and black to black not red to black.
X2!
Reply With Quote
  #17  
Old 09-01-2016, 04:23 PM
t-meggs t-meggs is offline
Newbie
 
Join Date: Aug 2016
Posts: 14
t-meggs is on a distinguished road
Default Re: Transmitter control options

Ok good news!

wiring completed, body mounted, test run a success!

even a car with two ladies stopped to watch.

Hmmmm, ice, cold drinks, all i need is a pool and i have a new use for my truck.

Thank you for the assistance.
Attached Images
File Type: jpg 20160901_161609.jpg (157 Bytes, 61 views)
File Type: jpg 20160901_161625.jpg (157 Bytes, 61 views)
File Type: jpg 20160901_161641.jpg (157 Bytes, 59 views)
Reply With Quote
  #18  
Old 09-01-2016, 04:25 PM
t-meggs t-meggs is offline
Newbie
 
Join Date: Aug 2016
Posts: 14
t-meggs is on a distinguished road
Default Re: Transmitter control options

pics not showing.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:19 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.