|
Electronics tech Anything to do with the electronics in a model. Lights, Radio, ESC, Servo, Basic electrical. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
esc switch question
Hi, I have three esc's to run tracks and swing on my excavator, they each came with a small on off switch attached. Is this switch necessary or can it be eliminated by soldering two wires together and removing switch?
Thanks Terry |
#2
|
||||
|
||||
Re: esc switch question
The switches can be eliminated like that with no problem.
I would leave a switch installed on whichever one is powering the rx, just so the machine won't go live as soon as you connect a battery. Also did you pull the red rx leads on the non-power escs? |
#3
|
||||
|
||||
Re: esc switch question
Thanks for your reply Frizzen, I did cut the redwire on all three, I have another esc for my pump motor that does the receiver charge.
Terry |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|