|
Electronics tech Anything to do with the electronics in a model. Lights, Radio, ESC, Servo, Basic electrical. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Two esc in receiver.
Hello. I need help. I will plug two esc for two motor application in my loader. I will drive my hydraulic pump and the transmission. Could you give my the wiring diagram for plugging with only one battery? Thanks.
|
#2
|
||||
|
||||
Re: Two esc in receiver.
You need to join the power wires together red to red black to black. Then disconnect one red servo wire from
The esc plug. I would make the esc with the red wire still connected the motor esc and the other for the pump |
#3
|
||||
|
||||
Re: Two esc in receiver.
Google busbars
Power & + - loops on one side; connect all your esc's & what not on the other side. The esc that has the highest BEC (battery eliminator circuit - powers your receiver), use that one & disconnect the red wire from the receiver plug on the other one. Having both providing BEC can lead to radio glitch interference problems. busbar in white
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#4
|
|||
|
|||
Re: Two esc in receiver.
Thank you very much for the tips!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|