Lesu Liebherr 574 loader kit build

[Table Top Trucker]

Here is a shot of the motor with the mounting plate bolted up: https://postimg.org/image/q8kgagrad/][/url]

Although the drive motor has a D-shaped pinion shaft the pinion doesn't have same D-shape. The pinion is a press fit more or less and does not have a set screw.

On the plus side the transmission had plenty of grease in it and operated smoothly.

Here is a pic of the motor\transmission assembly: https://postimg.org/image/3wmnh1plh/][/url]

[skeeter]

Originally Posted by Table Top Trucker

Here is a shot of the motor with the mounting plate bolted up: https://postimg.org/image/q8kgagrad/][/url]

Although the drive motor has a D-shaped pinion shaft the pinion doesn't have same D-shape. The pinion is a press fit more or less and does not have a set screw.

On the plus side the transmission had plenty of grease in it and operated smoothly.

Here is a pic of the motor\transmission assembly: https://postimg.org/image/3wmnh1plh/][/url]

I'll be anxiously awaiting to see how well you like this setup! I've got the same thing in a Tamiya frame waiting for me to finish building it. I wonder if it'll be strong enough to hold up to the weight of a superdump?