|
Electronics tech Anything to do with the electronics in a model. Lights, Radio, ESC, Servo, Basic electrical. |
|
Thread Tools | Display Modes |
#19
|
||||
|
||||
Re: Flysky fs-i6 work for us?
Get the fs-i6 or fs-i6x. It's a nice entry level rig, it's not the best. They've already pointed out you may outgrow it pretty quick, but i'm still not at that level.
I'm cheap and don't need channel mixing for hydros. You could probably put the hydro esc on an aux channel with a Pot running it, and treat it like hand throttle for setting idle / running speed? Maybe put it on the normal/acrobatic mode switch? I dunno, i built a cable-machine to avoid all that. https://oscarliang.com/flysky-tx-rx-buyers-guide/ The easy answer for RX is either: Fs-ia6 Fs-ia6b Standard connectors, all plug&play. I'll try to dig deeper, there are also 8 / 10 channel rx that work too, and can send telemetry back to the tx if you add sensors. Or if you're tight on space, there are some that should work with extra soldering. Helpful non-airplane setup guide http://runamok.tech/RunAmok/flysky_i6.html
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time... Last edited by frizzen; 09-01-2020 at 03:06 PM. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|