RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Kings of the Road > Australian Rigs & Roadtrains

Australian Rigs & Roadtrains A place for aussies to show off their unique truck configurations.


Reply
 
Thread Tools Display Modes
  #21  
Old 08-17-2015, 03:19 PM
ozy operator ozy operator is offline
Newbie
 
Join Date: Aug 2015
Posts: 35
ozy operator is on a distinguished road
Default Re: my knight hauler build and tri axle stag tippers

Thanks chris1210 had a few issues uploading lol.
Reply With Quote
  #22  
Old 08-17-2015, 03:23 PM
ozy operator ozy operator is offline
Newbie
 
Join Date: Aug 2015
Posts: 35
ozy operator is on a distinguished road
Default Re: my knight hauler build and tri axle stag tippers

Any hydraulic experts here need to pick your brains on how it works.
Going to need 2 rams 1x5 stage and 1x4 stage.
so is it 1 pump and esc per ram or can I use a diverter block to send oil to the other ram if that makes sense..
any info would be great.
cheers
Rhys
Reply With Quote
  #23  
Old 08-17-2015, 05:15 PM
chris1210's Avatar
chris1210 chris1210 is offline
Newbie
 
Join Date: Apr 2015
Posts: 65
chris1210 is on a distinguished road
Default Re: my knight hauler build and tri axle stag tippers

Are you planning to use Scaleart hydraulic system? As I know they have long and short telescope cylinders, but you have to modify your long dump box to fit their long telescope cylinder.
Reply With Quote
  #24  
Old 08-18-2015, 12:06 AM
ozy operator ozy operator is offline
Newbie
 
Join Date: Aug 2015
Posts: 35
ozy operator is on a distinguished road
Default Re: my knight hauler build and tri axle stag tippers

I think that is the way i will go they seem to be good cylinders all comes down to getting the 2 cylinders working of one pump and esc.
Plan is to have a diverter valve in the feed line running of servo to open shut valve to divert between the 2 cylinders.
This is my thoughts anyway.
Its how the 1.1 trailers are setup to work, use to be a pain dumping rear trailer then position 1st trailer to dump then get out of truck and pull isoltion vavle on side of 1st trailer to run that cylinder.
Reply With Quote
  #25  
Old 08-18-2015, 01:26 AM
ozy operator ozy operator is offline
Newbie
 
Join Date: Aug 2015
Posts: 35
ozy operator is on a distinguished road
Default Re: my knight hauler build and tri axle stag tippers

Just been on scaleart website and I must say the exchange rate to autralian dollar from euros is a killer. 1 euro=1.50 australian this could get very expensive indeed.
Wont get much change from 2000 australian dollas landed im guessing.
Now how to get it past the better half
Reply With Quote
  #26  
Old 08-18-2015, 04:19 AM
chris1210's Avatar
chris1210 chris1210 is offline
Newbie
 
Join Date: Apr 2015
Posts: 65
chris1210 is on a distinguished road
Default Re: my knight hauler build and tri axle stag tippers

Yes, they're pretty expensive. You may have a look on Magomhrc for their hydraulic, valves...
Reply With Quote
  #27  
Old 08-18-2015, 05:46 AM
ozy operator ozy operator is offline
Newbie
 
Join Date: Aug 2015
Posts: 35
ozy operator is on a distinguished road
Default Re: my knight hauler build and tri axle stag tippers

Thanks will have a look and see what they have to offer

Cheers
Rhys
Reply With Quote
  #28  
Old 11-30-2015, 07:46 PM
NORM's Avatar
NORM NORM is offline
Newbie
 
Join Date: Dec 2014
Location: Glen Rock, NJ
Posts: 72
NORM is on a distinguished road
Default Re: my knight hauler build and tri axle stag tippers

Trailers look awesome
__________________

all the DEDICATED Members will be there.

the hobbiest formally known as Sweet Pete Wrecker, Founding Member of the East Coast Mini Truckers.
Reply With Quote
  #29  
Old 12-16-2020, 09:28 AM
aussie mack aussie mack is offline
Newbie
 
Join Date: Apr 2012
Location: kalghoorlie
Posts: 18
aussie mack is on a distinguished road
Default Re: my knight hauler build and tri axle stag tippers

hey man did you ever end up finishing these would love to see the end results
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:15 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.