Michigan T-24 project

[jerry56]

Agreed ddmckee54 it would be tipsy...lol... they will work but they will be manual. I thought about some kind of rack and pinion to move them in and out but then you have the issue of how to make them go up and down.... and how to keep the wiring for that from getting cut up or rubbed bare just more than I'm going to tackle at this point.
I double checked and the motors I used are 6v 200rpm so running at 7.4 that should be close to 250rpm with the WPL axles at 2:1 that gives me about 125 at the wheels... not super fast but in real life this thing never was...