|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Manitowoc 4100W 1/25
I got my Manitowoc 4100W out of the box this afternoon and played a bit. I rigged it up with all the boom I have for it and took a few videos raising the boom and walking.
Have a look: http://www.youtube.com/watch?v=xkWIjcQel_M Kerst |
#2
|
||||
|
||||
Re: Manitowoc 4100W 1/25
Nice crane! Is it fully RC?
__________________
Scott "No load is too Small" |
#3
|
||||
|
||||
Re: Manitowoc 4100W 1/25
thanks! No RC here, just old fashioned levers on the crane itself. There is one motor for all the functions. It all works with clutches and brakes. The boomhoist has a separate motor.
Kerst |
#4
|
||||
|
||||
Re: Manitowoc 4100W 1/25
Was it a custom build or can it be purchased that way? Do you have a link that shows how it functions?
__________________
Scott "No load is too Small" |
#5
|
||||
|
||||
Re: Manitowoc 4100W 1/25
Quote:
http://www.imcats.com/showpics2008.htm Kerst |
#6
|
||||
|
||||
Re: Manitowoc 4100W 1/25
Quote:
Wow! Thanks for the link. I'll bet it is just as much fun to operate manually as it would be remotely. You must have tremendous patience to get all of that working properly. Very nice work.
__________________
Scott "No load is too Small" |
#7
|
|||
|
|||
Re: Manitowoc 4100W 1/25
Yeah... Man, I'm blown away here. This, I have not seen. Do you have any pictures of the build in progress? I'd like to see how the tracks were made, and where did you get the drive chain for them? or did you make it? Very impressive! Dan
|
#8
|
||||
|
||||
Re: Manitowoc 4100W 1/25
I don't have any pictures of the build, because I did that in the early 80's.
The tracks are individually made of brass, 5 short pipes soldered to 2 rectangular brass pieces, I used a jig to keep it all together, a lot of work, but the result is good. The chain is from Mecano. Kerst |
#9
|
|||
|
|||
Re: Manitowoc 4100W 1/25
Awesome. We want more videos!
|
#10
|
||||
|
||||
Re: Manitowoc 4100W 1/25
Got it out of the box!
I was asked to display it in the local community center for a while, so I rigged it up in Ringer configuration. It is accompanied by the Krupp 180GMT in scale 1/20. Kerst |
#11
|
|||
|
|||
Re: Manitowoc 4100W 1/25
cool awsome cranes
__________________
I built this thing and have it working now what do I do with it? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|