RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-10-2011, 10:15 PM
fhhhstix's Avatar
fhhhstix fhhhstix is offline
Out of control
 
Join Date: Aug 2010
Location: Kirklin IN.
Posts: 3,788
fhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud of
Talking CAT 988F Series II Wheel Loader

I have wanted a Wheel Loader for some time now so I decided to try my hand at building one. I have the tracked loader but I wanted some thing to load a little faster and have more reach so I decided to go with the 988 in 1/14 scale.

Here is what I am attempting to build.









Here is what I have so far. The Mammoth tires are the right size for this build in 1/14 scale so now I am waiting on the rim builder to make my new one's.



















I have had electronics in it and ran it around the garage. So far it seams like it will have plenty of power now I just have to make it look like some thing.

Thanks for looking.
Travis
__________________
AKA "00" Biddle


RIP FreddyGearDrive 2-12-59/12-19-11
Reply With Quote
  #2  
Old 09-10-2011, 10:27 PM
ihbuilder's Avatar
ihbuilder ihbuilder is offline
Fabrication and design , super moderator
 
Join Date: Aug 2010
Location: in a cage in Auburn,PA
Posts: 3,557
ihbuilder is a jewel in the roughihbuilder is a jewel in the roughihbuilder is a jewel in the roughihbuilder is a jewel in the rough
Default Re: CAT 988F Series II Wheel Loader

"so now I am waiting on the rim builder to make my new one's"

O so blame the wheel man , eeh Looks good looks like it should load the mack OK
__________________
RIP FreddyGearDrive 2-12-59/12-19-11

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old 09-10-2011, 11:06 PM
Snochaser's Avatar
Snochaser Snochaser is offline
Craftsman
 
Join Date: Aug 2010
Location: Southwest Ohio
Posts: 929
Snochaser will become famous soon enoughSnochaser will become famous soon enough
Default Re: CAT 988F Series II Wheel Loader

You have been growing with ingenuity and complexity with each build Travis. Really looks nice, made your own transfer case out of delrin I see.?.? It's nice to see it come alive after the discussion in Indy. Keep it up, I'm sure I'll steal some ideas for my next complex machinery build. That poor guy in a cage PA is everyone's friend, he just can't say no,can he?


Ben
__________________
You are an inspiration to many
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
, you will not be forgotten.
R.I.P. FGD

Work Hard, Play Hard!
Never Forget- 343
Reply With Quote
  #4  
Old 09-10-2011, 11:47 PM
fhhhstix's Avatar
fhhhstix fhhhstix is offline
Out of control
 
Join Date: Aug 2010
Location: Kirklin IN.
Posts: 3,788
fhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud of
Default Re: CAT 988F Series II Wheel Loader

Quote:
Originally Posted by Snochaser View Post
You have been growing with ingenuity and complexity with each build Travis. Really looks nice, made your own transfer case out of delrin I see.?.? It's nice to see it come alive after the discussion in Indy. Keep it up, I'm sure I'll steal some ideas for my next complex machinery build. That poor guy in a cage PA is everyone's friend, he just can't say no,can he?


Ben
Thanks Ben and and you are right Steve does have a hard time saying no.

I am noticing in my pics I have the frame to high on the front axle so in the morning I will disassemble it and machine it down some to make the frame sit level. Funny how you notice things more when you look at it in a pic.

I also got my order from Micro Mark today, new vice, clamp set, and true inch conversion for the mill. They were out of stock on the R8 Collet set but I will be getting that as soon as it is back in stock as well as smaller tool makers vice.



Travis
__________________
AKA "00" Biddle


RIP FreddyGearDrive 2-12-59/12-19-11
Reply With Quote
  #5  
Old 09-11-2011, 12:11 AM
doodlebug's Avatar
doodlebug doodlebug is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: South 40 Swamp, Utah
Posts: 2,398
doodlebug is on a distinguished road
Default Re: CAT 988F Series II Wheel Loader

Hey Travis, look's like a fun project! Keep us posted! Like the T-Case.

Steve, Aren't you looking for a new coal shovel? LOL!
Cheer's, Neil#2 aka doodlebug.
Reply With Quote
  #6  
Old 09-11-2011, 03:35 AM
Espeefan's Avatar
Espeefan Espeefan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Wisconsin
Posts: 2,888
Espeefan has a spectacular aura aboutEspeefan has a spectacular aura aboutEspeefan has a spectacular aura about
Default Re: CAT 988F Series II Wheel Loader

I like these older Cats. The cabs are neat, with the triangle windows.

That's an interesting drivetrain and frame. So you've got what looks like Axial axles, but you made one with a pass through input/output shaft, and you are using that as the mounts to allow for axle oscillation? That's actually a pretty cool idea. I don't think I would have thought of something like that. How's it work? Just a couple bronze/oilite bushings on the input/output shafts to allow oscillation? Kind of surprised there is enough shaft left to hook up the driveshaft yoke.
__________________
Nathan
Reply With Quote
  #7  
Old 09-11-2011, 04:55 AM
androiduk androiduk is offline
Newbie
 
Join Date: Aug 2011
Location: UK at present but soon to be elsewhere
Posts: 66
androiduk is on a distinguished road
Default Re: CAT 988F Series II Wheel Loader

I love it , excellant drive train work , I am in awe ! !
__________________
The day we stop learning is the day we die ! !
Reply With Quote
  #8  
Old 09-11-2011, 09:57 AM
fhhhstix's Avatar
fhhhstix fhhhstix is offline
Out of control
 
Join Date: Aug 2010
Location: Kirklin IN.
Posts: 3,788
fhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud of
Default Re: CAT 988F Series II Wheel Loader

Quote:
Originally Posted by doodlebug View Post
Hey Travis, look's like a fun project! Keep us posted! Like the T-Case.

Steve, Aren't you looking for a new coal shovel? LOL!
Cheer's, Neil#2 aka doodlebug.
Thanks Neil I just hope it works when I am done.


Quote:
Originally Posted by androiduk View Post
I love it , excellant drive train work , I am in awe ! !
Thanks I had to come up with something different to get it all to fit and work.

Quote:
Originally Posted by Espeefan View Post
I like these older Cats. The cabs are neat, with the triangle windows.

That's an interesting drivetrain and frame. So you've got what looks like Axial axles, but you made one with a pass through input/output shaft, and you are using that as the mounts to allow for axle oscillation? That's actually a pretty cool idea. I don't think I would have thought of something like that. How's it work? Just a couple bronze/oilite bushings on the input/output shafts to allow oscillation? Kind of surprised there is enough shaft left to hook up the driveshaft yoke.
Nate you are right they are Axial axles and the shaft was to short. The good thing about these axles is that they use a pin drive pinion so I just made a longer shaft to make room for the pivot. The other side is a Traxxas Stampede front axle shaft, I didn't need an output or input just a pivot point.

Thanks to all for looking.
Travis
__________________
AKA "00" Biddle


RIP FreddyGearDrive 2-12-59/12-19-11
Reply With Quote
  #9  
Old 09-11-2011, 10:53 AM
Tamiya Cowboy's Avatar
Tamiya Cowboy Tamiya Cowboy is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: South Dakota
Posts: 2,981
Tamiya Cowboy has a spectacular aura aboutTamiya Cowboy has a spectacular aura aboutTamiya Cowboy has a spectacular aura about
Default Re: CAT 988F Series II Wheel Loader

Here you go again amazing me with your ability's this thing is going to be the best loader yet cant wait to see more.. You should look into the alum housings for them axles you might as well go over the top..
__________________
Paul W. "Tamiya Cowboy"

HI.. My name is Paul.. And.. I.. Have a Cabover Addiction.

RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT"
Like Us on Facebook "Corn Field Mafia"



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #10  
Old 09-11-2011, 01:02 PM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: CAT 988F Series II Wheel Loader

I was just wondering what the dimensions are on those tires?

Thanks Reg
Reply With Quote
  #11  
Old 09-11-2011, 01:13 PM
td9clyde td9clyde is offline
Dozer Builder
 
Join Date: Aug 2010
Location: Keystone, IN
Posts: 728
td9clyde will become famous soon enoughtd9clyde will become famous soon enough
Default Re: CAT 988F Series II Wheel Loader

very nice work i can dig that lol i also think aluminum axels would be a good idea for a lil weight and strength for pickin up those heavy loads of dirt or crushed rubber very cool good start can't wait to see more
__________________
I built this thing and have it working now what do I do with it?
Reply With Quote
  #12  
Old 09-11-2011, 01:18 PM
SmallHaul's Avatar
SmallHaul SmallHaul is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Eastern, PA
Posts: 1,113
SmallHaul will become famous soon enoughSmallHaul will become famous soon enough
Default Re: CAT 988F Series II Wheel Loader

Cool project Travis and nice start.

Great idea on the large size too because it is easier to load everything.
__________________
Scott

"No load is too Small"
Reply With Quote
  #13  
Old 09-11-2011, 04:39 PM
dirtpusher9's Avatar
dirtpusher9 dirtpusher9 is offline
Moderator
 
Join Date: Aug 2010
Location: Texas
Posts: 457
dirtpusher9 has a spectacular aura aboutdirtpusher9 has a spectacular aura about
Default Re: CAT 988F Series II Wheel Loader

Nice choice on the loader Trav. I think your going to enjoy scratch building equipment more than trucks and trailers. There is more challenges because you can't just buy the parts you need, you most build them.
__________________
Joe
Reply With Quote
  #14  
Old 09-11-2011, 04:49 PM
fhhhstix's Avatar
fhhhstix fhhhstix is offline
Out of control
 
Join Date: Aug 2010
Location: Kirklin IN.
Posts: 3,788
fhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud of
Default Re: CAT 988F Series II Wheel Loader

Quote:
Originally Posted by dirtpusher9 View Post
Nice choice on the loader Trav. I think your going to enjoy scratch building equipment more than trucks and trailers. There is more challenges because you can't just buy the parts you need, you most build them.
I still like building trucks and I have made the trucks more complicated these days as well. Don't worry though I am collecting parts for a dozer as well and so far I have the tracks, gearmotors, and ESC, not much but a start but I am getting there. I am also working on getting the funds for one of the excavators RC4WD is selling.

Travis
__________________
AKA "00" Biddle


RIP FreddyGearDrive 2-12-59/12-19-11
Reply With Quote
  #15  
Old 09-11-2011, 04:55 PM
fhhhstix's Avatar
fhhhstix fhhhstix is offline
Out of control
 
Join Date: Aug 2010
Location: Kirklin IN.
Posts: 3,788
fhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud of
Default Re: CAT 988F Series II Wheel Loader

Here is a video testing the drive train and steering. Click Here

Travis
__________________
AKA "00" Biddle


RIP FreddyGearDrive 2-12-59/12-19-11
Reply With Quote
  #16  
Old 09-11-2011, 05:41 PM
elliot330 elliot330 is offline
Green Horn
 
Join Date: Jan 2011
Location: Swindon, UK
Posts: 291
elliot330 is on a distinguished road
Default Re: CAT 988F Series II Wheel Loader

Hi Travis,

Excellent start... it looks fairly capable in the video too, near the end it went up the step very easy. Looking forward to seeing this is progress.

Elliot
__________________
Elliot.
Reply With Quote
  #17  
Old 09-11-2011, 08:33 PM
sparkycuda's Avatar
sparkycuda sparkycuda is offline
Journeyman
 
Join Date: Aug 2010
Location: English, IN
Posts: 698
sparkycuda is on a distinguished road
Default Re: CAT 988F Series II Wheel Loader

Very good, Travis! Are you going with hydraulics for the work equipment, or going to surprize us with something new - ceramic magnet cylinders or nano-technology gearmotors? Anyway, very cool beginning.

Ken
__________________
Big iron is awesome!
Reply With Quote
  #18  
Old 09-11-2011, 08:59 PM
fhhhstix's Avatar
fhhhstix fhhhstix is offline
Out of control
 
Join Date: Aug 2010
Location: Kirklin IN.
Posts: 3,788
fhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud offhhhstix has much to be proud of
Default Re: CAT 988F Series II Wheel Loader

Quote:
Originally Posted by sparkycuda View Post
Very good, Travis! Are you going with hydraulics for the work equipment, or going to surprize us with something new - ceramic magnet cylinders or nano-technology gearmotors? Anyway, very cool beginning.

Ken
Thanks Ken I have some hyd alternative ideas but we will have to see how they work out.

Travis
__________________
AKA "00" Biddle


RIP FreddyGearDrive 2-12-59/12-19-11
Reply With Quote
  #19  
Old 09-11-2011, 10:06 PM
Brian in PA's Avatar
Brian in PA Brian in PA is offline
I'd rather be truckin'
 
Join Date: Aug 2010
Location: Avella PA
Posts: 1,320
Brian in PA will become famous soon enoughBrian in PA will become famous soon enough
Default Re: CAT 988F Series II Wheel Loader

This is a very ambitious build Trav, but if anyone can do it you can! I'm staying tuned for this one.

Brian
Reply With Quote
  #20  
Old 09-11-2011, 10:13 PM
rc_farmer's Avatar
rc_farmer rc_farmer is offline
Master Builder
 
Join Date: Aug 2010
Location: Arkansas
Posts: 828
rc_farmer is on a distinguished road
Default Re: CAT 988F Series II Wheel Loader

Travis, glad to see you are joing the "over-sized" club too....., greal build! You know i will be following this.
__________________
Giving up is not an option!!!

Rob
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:27 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.