|
Truck Building Tech Covers mechanical and electrical components for truck modeling |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
fuel tanks?
I have tried the search technique but have come up dry. I want to try and make my own fuel tanks for my King daycab. What size pipe do I need, how long and what is used for endcaps? I am building one part at a time and I have never seen any of the parts in person before so I don't even have a comparison. Thanks for the info in advance. I know I could also look through build threds and find the info but that could be time consuming so I tried this rout.
__________________
Anybody who runs is a VC, anybody who stands still.. is a well diciplined VC!! GET SOME! To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#2
|
||||
|
||||
Re: fuel tanks?
I used pvc pipe. I think 1 1/2 inch diameter. as far as length thats up to you. I think I cut mine 5 inch long. I traced the diameter to a piece of styrene then cut it out and glued to the ends. Sanded to smooth it out some.
Hope this helps Dave
__________________
Thanks for looking. All comments, suggestions, and constructive criticism are appreciated. Dave |
#3
|
||||
|
||||
Re: fuel tanks?
indeed sir it does help. without actually seeing any before, I didn't know where to start on size. Thanks for the info.
__________________
Anybody who runs is a VC, anybody who stands still.. is a well diciplined VC!! GET SOME! To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#4
|
||||
|
||||
Re: fuel tanks?
well, I managed to come up with 1 1/4 inch pvc and 2 inch pvc. not sure which to use because I don't actually have it on hand till tomorrow at work.
__________________
Anybody who runs is a VC, anybody who stands still.. is a well diciplined VC!! GET SOME! To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#5
|
||||
|
||||
Re: fuel tanks?
The 2 inch might be a little big, but it depends on what kind of truck you are building and the look you are going for. Here's a pic of my work in progress with my tanks mounted.
Thanks Dave
__________________
Thanks for looking. All comments, suggestions, and constructive criticism are appreciated. Dave Last edited by dmess62; 01-29-2013 at 05:41 PM. |
#6
|
||||
|
||||
Re: fuel tanks?
Thanks for the pics, I went with 1.25", now I just gotta find endcaps and a way to mount them.
__________________
Anybody who runs is a VC, anybody who stands still.. is a well diciplined VC!! GET SOME! To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#7
|
|||
|
|||
Re: fuel tanks?
Those tanks are perfect size. Are they gonna be chrome or painted??
|
#8
|
||||
|
||||
Re: fuel tanks?
Looking Great Buddy!!! I think the tanks look perfect
__________________
Hi my name is Aaron.... And i'm a truckaholic! |
#9
|
||||
|
||||
Re: fuel tanks?
Stock Tamiya tanks are about 1.5" diameter. Wedico tanks are closer to 1.75" diameter, which I think looks to big, for a Wedico. I'm going to go with 1.5" on my Wedico, and it looks great. The reason Wedico went larger, was so that they could fit an ESC inside the tank, freeing up room for a full cab interior. Something to consider. It's a nice place to hide a receiver, ESC, servo, and other electronic components. If a truck is going to have a tank, you might as well use it for holding something, if possible.
__________________
Nathan |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|