|
General Discussion A place to post off topic discussions. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Spektrum DX10 system fault
Hy Guys, I purchased said item at Dortmund this year for one of my new models, The model that it is going into is ready for the transmitter testing.
After connecting all of the servos all was good, turn off the transmitter came back to it later turn it all on again and this came up. Has anyone had any experience with this issue? |
#2
|
|||
|
|||
Re: Spektrum DX10 system fault
did u buy it new or used because that may be the problem
|
#3
|
||||
|
||||
Re: Spektrum DX10 system fault
Yes it was new out of the box from TTM in Germany |
#4
|
|||
|
|||
Re: Spektrum DX10 system fault
Hi Paul,
Hold the black roller button down for 5 to 30 seconds and it will clear..
__________________
Elliot. |
#5
|
|||
|
|||
Re: Spektrum DX10 system fault
did paul sort it out mate
|
#6
|
|||
|
|||
Re: Spektrum DX10 system fault
have u fixed the problem
|
#7
|
||||
|
||||
Re: Spektrum DX10 system fault
Thanks Elliot, I did what you said and it now works fine. How did you know about the fix?
Paul |
#8
|
|||
|
|||
Re: Spektrum DX10 system fault
elliot is talented
|
#9
|
|||
|
|||
Re: Spektrum DX10 system fault
Hi Paul, glad it worked. My radio did the same a few times, its a problem with Version 1 of the software. Sometimes it clears by itself but once I couldn't get rid of it, so I called horizon hobby and they told me about holding the roller button done until it clears.
__________________
Elliot. |
#10
|
|||
|
|||
Re: Spektrum DX10 system fault
I would suggest upgrading the firmware on the 10t if you haven't already.
Note: you should backup you models to the SD card before doing so. You may also need to re-bind the models. Cheers, AP |
#11
|
||||
|
||||
Re: Spektrum DX10 system fault
Quote:
Now it takes about ten seconds for the transmitter to boot up. Prior to the firmware upgrade it would boot up in about 1 second. It's not a big problem but its not the same as it was out of the box any ideas? Thanks Paul |
#12
|
|||
|
|||
Re: Spektrum DX10 system fault
Paul,
Mine takes a while to start up as well, not 10 seconds though. I might try and ask Spektrum to comment on the boot time (it does feel long). I will also check my DX8 and see if it is the same. Cheers, AP |
#13
|
||||
|
||||
Re: Spektrum DX10 system fault
Ok thanks a lot
Paul |
#14
|
|||
|
|||
Re: Spektrum DX10 system fault
Paul,
I did ask Spektrum about the boot time, apparently it is due to the additional complexity. The dx18 is similar to the 10t. FWIW I have been playing with the spam files, from bog the 8 and the 10t, the 10t's ones have a lot more stuff. Cheers, AP |
#15
|
||||
|
||||
Re: Spektrum DX10 system fault
Quote:
Paul |
#16
|
|||
|
|||
Re: Spektrum DX10 system fault
I have a comment from someone in the know in Spektrum whom reckons 8 mixes are available on the DX10T.
Today I tried some stuff with the mixes on the radio, and documented how i did it: https://docs.google.com/file/d/0B6LW...it?usp=sharing I do know that whilst I can't see the mixes once I move them they do still work. Just not sure how many active ones I can have. Cheers, AP |
#17
|
||||
|
||||
Re: Spektrum DX10 system fault
Can't open the link, can any one else open it?
|
#18
|
|||
|
|||
Re: Spektrum DX10 system fault
Yes I can
|
#19
|
|||
|
|||
Re: Spektrum DX10 system fault
All,
As an alternative you can try downloading it from here: https://sites.google.com/site/txprof...edirects=0&d=1 Paul, I have just sent you a PM as well. Cheers, Andrew P |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|