Unit Cable Hoe - Page 10

doodlebug · #**181** 08-17-2011, 12:21 AM

Hey Scott, Yer over the top, LOL! Keep it up! Any progress on the new boom yet?
Thank's for sharing! Later, Neil#2 aka doodlebug.

SmallHaul · #**182** 08-17-2011, 06:32 AM

Quote:

Originally Posted by doodlebug

Hey Scott, Yer over the top, LOL! Keep it up! Any progress on the new boom yet?
Thank's for sharing! Later, Neil#2 aka doodlebug.

Thanks Neil.

I am still getting ideas on the new boom. If I made it out of brass the extra weight would help it dig even better. I met a guy at the show that has a full scale Unit Hoe and he ran mine for about 20 minutes and commented that the stick is too long so, I'll have to go back over the numbers and see where I need to shorten it.

Papy · #**183** 08-17-2011, 11:16 AM

Quote:

Originally Posted by SmallHaul

...I'll have to go back over the numbers and see where I need to shorten it.

I can give you some measurements of a real machine, probably close to your's (see this thread)...this could help to calculate right proportions

SmallHaul · #**184** 08-25-2011, 11:28 AM

Quote:

Originally Posted by Papy

I can give you some measurements of a real machine, probably close to your's (see this thread)...this could help to calculate right proportions

Thanks but, Neil gave me all the numbers I just need to check them.

9W Monighan · #**185** 12-02-2011, 01:52 PM

Have you ever seen this machine Scott? It was at the 2008 Brownsville show with the HCEA convention.

SmallHaul · #**186** 12-02-2011, 04:20 PM

No Steve I haven't. Good picture of a nice machine. Thanks.

Reminds me that I need to shorten the stick on mine so that it looks better.

pumptech · #**187** 12-02-2011, 05:57 PM

Wow! Thats a really nice looking cable hoe,thanks for sharing that pic 9W

Luv your cablehoe Smallhaul ,very cool build!!!

Stuff · #**188** 12-02-2011, 10:41 PM

wow! dang near "done"

UnitCrane514 · #**189** 06-22-2012, 09:24 AM

Where do you guys find the sprockets for this stuff at????

SmallHaul · #**190** 06-22-2012, 03:07 PM

Quote:

Originally Posted by UnitCrane514

Where do you guys find the sprockets for this stuff at????

http://www.surpluscenter.com/sort.as...EN=20&PageNo=2

Great prices and good inventory.

kcusumano · #**191** 03-19-2013, 04:51 PM

wow lookin great

Rvjimd · #**192** 05-06-2013, 07:41 AM

Scott,

Where are you finding your donor units? I've been telling myself I need to get to some yard sales this spring to see if I can find anything to convert.

Looked at the local antique stores but didn't really see anything.

Also, do you have any pictures of the electrical connections for the hoe pivot? Did you use an audio jack?

Thanks

Jim

SmallHaul · #**193** 05-06-2013, 08:26 AM

Jim,

i bought both of my Units off ebay years ago. Now they ask crazy prices for them.

i run a JR 9503 in the cable Hoe and with JR & Spektrum you can bind multiple rx's to one radio at the same time. So, i have a separate battery, rx and power switch in the undercarriage.

i use these $6 rx's from hobby king:

http://www.hobbyking.com/hobbyking/s..._Receiver.html

Rvjimd · #**194** 05-06-2013, 08:28 AM

Scott,

I sort of thought, "that would be cool if you could do the two RX thing!" I wonder if you can do that with the DX6i?

I guess I need to look for some garage sales and see if I get lucky!

Jim

Rvjimd · #**195** 05-29-2013, 10:17 AM

Scott,

Another question. Where are you getting the brass pulleys, like on the stick?

Thanks

Jim

PS I tried binding two RX to my DX6i and that does work.

SmallHaul · #**196** 05-29-2013, 12:00 PM

Quote:

Originally Posted by Rvjimd

Scott,

Another question. Where are you getting the brass pulleys, like on the stick?

Thanks

Jim

PS I tried binding two RX to my DX6i and that does work.

Jim.

The pulleys are meccano pulleys and can be found on ebay UK.

The are from vintage mechanical toy sets.

Lil Giants · #**197** 05-29-2013, 02:31 PM

Quote:

Originally Posted by Rvjimd

Jim

PS I tried binding two RX to my DX6i and that does work.

With Spektrum, the rx's won't work simutaneously, a model change in the menu is necessary. Is the JR or Hobby King rx's any different.

pigeonfarmboy · #**198** 05-29-2013, 02:34 PM

Helps to be a Spektrum/JR DSMX receiver and radio to bind multiple receivers to one radio.

Rvjimd · #**199** 05-29-2013, 02:36 PM

Quote:

Originally Posted by pigeonfarmboy

Has to be a Spektrum/JR DSMX receiver and radio to bind multiple receivers to one radio.

It worked for me, I did read that BOTH RX that you use must be the same bit rate. Dsmx or dsm2. They can not be one of each.

Jim

SmallHaul · #**200** 05-29-2013, 05:16 PM

Quote:

Originally Posted by pigeonfarmboy

Helps to be a Spektrum/JR DSMX receiver and radio to bind multiple receivers to one radio.

I am using a JR9503 (non-X) and two hobby king clone $9 rx's both bound to my JR9503 at the same time and it works fine.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)