![]() |
|
Big Boys of the road 4x4/6x6/8x8/10x10 Trucks This forum is for those multiple axle trucks and other vehicles on and off road. |
![]() |
|
Thread Tools | Display Modes |
#41
|
||||
|
||||
![]()
These things look pretty cool. I like the fact that they're big but the truck bodies don't look bad on them! If I could just figure out how to steal all of your tires
![]() ![]() Reg |
#42
|
|||
|
|||
![]()
Ok so I played a little with the suspension on the Mini Beast and I was able to get another 1/2 of lift without even changing anything. I'm going to order bigger dual rate shocks and more aggessive tires. I'm trying to find where I can find the Iveco body for it, so far no luck locating it. I'll just keep looking I quess.
John |
#43
|
||||
|
||||
![]() Quote:
Using a 3S lipo 11 V +/- 5500mAh But as I showed I am using a Leopard LBH3660/8T Brushless -3600kV- Between motor and the old version Tamiya 3speed gearbox from the Bruiser I have this semi automatic transmission from Traxxas, It's more of a clutch system. But it works perfect ! (TWO SPEED W/Reverse Auto Transmission TC3 Traxxas E-max) As a ESC I am using a 150 A with a BEC of 6V 6A Tyres are from RC4WD : Crazy Crawlers 2.2 You can still find them in different stores or on ebay I did cut the foam a little bit and put weights in the rims. Furthermore a used these shocks from RC4WD Spark Comp Shock with Ti Shaft (110mm) They make the suspension a whole lot better ! The originals are to short and to stiff. Then I changed the punisher shafts, I am using the ones from Gmade. Finally I changed the XVD's from the front axle. Broke one (!!??) after my first run, but furthermore these XVD's are stronger and they allow more steering. Mike |
#44
|
||||
|
||||
![]() Quote:
http://www.schink-1-8.de/produkte.htm http://www.skorpti.de/default.htm http://www.truckmodellsport.de/ Sent me a picture of the Iveco body please, and I'll keep looking for it. Mike |
#45
|
|||
|
|||
![]()
Hey Mike,
How are you doing ? I was hoping to hear from you , and thanks for the links and the tips for improving on the Mini Beast. There is a lot of room for improvements. The shocks are way to stiff and they tend to stick. Also when you turn the wheels full lock they rub on the suspension links ! I will be changing a lot of things on this one. I will send you pictures on the Iveco cab the only place I found it is on youtube.com . No one seems to know where I can get it ? Thanks John |
#46
|
|||
|
|||
![]()
Here you go Mike here's a couple of pictures I found enjoy !
John |
#47
|
||||
|
||||
![]() Quote:
I know them, the Belgium army is using them. See them every week, since I live near the Belgium Paracommando base. As I said, I'll keep it in mind and will search for it ! Mike |
#48
|
|||
|
|||
![]()
Hey Mike
I saw that right after I put the pictures up . I think they are made in Italy from what I can tell. I like the crew cab set up myself. I'll keep looking for it on my end as well. Best Regards John |
#49
|
|||
|
|||
![]()
I just finished building the new shocks and putting them on the Mini Beast. They are definitely heavy duty compared to the original ones. It raised the frame up about an inch more what a differences they made. Heres some pic's
|
#50
|
|||
|
|||
![]()
Here's somemore to look at.
|
#51
|
|||
|
|||
![]()
That steering linkage might be a problem. too long of spacers. i had terrible issues with 1/3 the lenght of what you are offsetting. ended up mounting the servo on the axle despite my dislike for doing so.
|
#52
|
|||
|
|||
![]()
Boy you got that right CDM I'm finding that out.
Yachtnutz |
#53
|
|||
|
|||
![]()
I am planning to build a Beast 6x6 and use it as a transport for my axial wraith 1:10
But i am not certain that the wraith Will fit. How much room is left behind the Man cab. Is it possible to build a flat transport deck and fit a 1:10 car? |
#54
|
||||
|
||||
![]() |
#55
|
|||
|
|||
![]()
Nice build I like the military truck very cool .
|
#56
|
|||
|
|||
![]()
Hey Mike how's it going sorry I haven't been on lately, but I'm helping my wife start her new Company . She is really busy going back and forth ,anyway thanks form the pictures.
Take care John |
#57
|
|||
|
|||
![]()
Hi mate,
Just wondering how you are getting on with your beast & the search for the cab? I just bought myself a beast and have to say that once I'd gone round & thread locked everything it is a solid rig. I've got the punisher shafts to replace but I'm now wondering about shocks. I'm leaning toward the Old Man Emu ones from RC4WD, mainly cos they look so scale but I can't find any reviews of them. Oh well keep looking!!! |
#58
|
||||
|
||||
![]()
Very cool military build.
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|