|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
#61
|
||||
|
||||
Re: Euclid R18
That looks very similar to one these two sitting in Atlin BC slowly sinking into the ground.
|
#62
|
||||
|
||||
Re: Euclid R18
OOOOOh! I smell road trip.
I might have to take the camera and get a bunch of photo's of those machines. Live Steam, R/C, and model loaders. That would be a unique build. |
#63
|
||||
|
||||
Re: Euclid R18
For some steam shovel footage see chapter 3 http://video.pbs.org/video/1747929120
reminds me of my favorite book "Mike Mulligan and his Steam Shovel" They were definately animated in operation! Later, Neil#2 aka doodlebug. |
#64
|
||||
|
||||
Re: Euclid R18
I finally did a little more work to the truck this week. Got to play outside for a minute between rain squalls...http://youtu.be/nupRfwlEVQA?hd=1
|
#65
|
||||
|
||||
Re: Euclid R18
The truck looks great and seams to get around real good but your gonna be there a while trying to move that big pile of dirt with that little truck.
Travis
__________________
AKA "00" Biddle RIP FreddyGearDrive 2-12-59/12-19-11 |
#66
|
||||
|
||||
Re: Euclid R18
HAHA! Yeah I think I might need more batteries.
|
#67
|
||||
|
||||
Re: Euclid R18
Great video of the Steam shovel.
Hope you can make the truck show in Port, it's early in September I think the 4th. Jordy |
#68
|
||||
|
||||
Re: Euclid R18
I should be able to make the port show. Hopefully I will have this thing done by then...
|
#69
|
||||
|
||||
Re: Euclid R18
Here's a nice picture to add to your thread.
|
#70
|
||||
|
||||
Re: Euclid R18
**** Construction????? Uh ya OK. Haha!
Seriously though those are really cool pictures. I'm guessing that those trucks are from the early fifties, before GM bought them out? Really cool, thanks very much! Reg |
#71
|
||||
|
||||
Re: Euclid R18
Quote:
Hope you don't mind me flooding your post but I thought this article and pictures I found on another site I visit would fit your build. I'll pull them off your thread if you want me to. |
#72
|
||||
|
||||
Re: Euclid R18
I guess I may have a strange sense of humour but my mind went somewhere else when I read "**** Construction"... Sorry
Feel free to flood away! I haven't read the whole story but I will. Since we have a 1961 Euc, I find it interesting to learn more about their history as well as others surrounding them. Thanks for the post. What model do you think the truck in the last pic would be? Reg |
#73
|
||||
|
||||
Re: Euclid R18
now I know who put in all those valleys in that area I did some work up there a couple years back . most all the dirt we worked in looked like overburden from some point in time .
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#74
|
||||
|
||||
Re: Euclid R18
Thank's, Steve!
|
#75
|
||||
|
||||
Re: Euclid R18
Here is another article from The Stripmine SIte
|
#76
|
||||
|
||||
Re: Euclid R18
Easy spring mounted ride my ***! Maybe they ride better than the ridged model but I know they don't ride easy. Haha! Cool post, thanks!
|
#77
|
||||
|
||||
Re: Euclid R18
So I had a little incident the last time out with the Euc and Volvo. I swapped out the 540 motor for a slower more powerful 550 in the Euc which I was very happy with. The speed was more realistic and the increased torque was great. The problem is that I have the mentality that if it "can do it" then it must be OK. Because the truck has more power and my Volvo is working good I started loading heavier and heavier loads so something had to give. The original diff that I built was a solid axle with aluminum Diawa spin casting reel gears so it bit the dust.
So.... I figured this was a good excuse to use my mill for the first time... As it turns out though most of the parts have been made on the lathe so far.I do have a lot of parts to make yet though so I'm sure I will use it on the pinion carrier and such.. Thanks for looking! |
#78
|
||||
|
||||
Re: Euclid R18
Hmm , I think I can see where you're goin with this looks great so far
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#79
|
|||
|
|||
Re: Euclid R18
lookin great wish my work looked that good lol can't wait to see it haulin again
__________________
I built this thing and have it working now what do I do with it? |
#80
|
|||
|
|||
Re: Euclid R18
Nice looking axle-do you have a plan for gears that will fit in there?
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|